CFD simulation and optimization of an industrial cement gas-solid air classifier

An air classifier is one of the main and effective devices in cement industry. In this study, a threedimensional, steady and two-phase (solid-gas) computational fluid dynamics (CFD) simulation was performed to optimize the performance of this device in the Kerman Momtazan cement plant, Iran. After the validation of CFD results, the air flow field and air path lines between fixed blades were checked carefully and the non-uniformity in velocity distribution and the formation of vortex flows between the blades close to particle inlets were observed. The study tried to improve the device efficiency by changing the method of entering particles into the device, resulting in a reduction in air classifier electrical energy consumption (from 41 to 35 (kW h)/t) and an increase in production rate (from 203 to 214 t/h). Additionally, the study investigated the effects of other modifiable operating conditions like rotary cage rotation speed, pressure difference, and inlet air temperature on the particle size distribution and classifier efficiency. The results showed that increasing the cage rotation speed decreased the product rate and the product particles mean diameter while increasing pressure difference or increasing temperature increased the product rate and the product particles mean diameter. It was concluded that these modifiable operating conditions can significantly affect the performance of the air classifier in the cement industry. (c) 2023 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.