Effect of carbon/tantalum hybrid film on the properties of carbon fiber and its composites based on magnetron sputtering

被引：1

作者：

Yang, Li ^{[1
]}

Jiang, Shu ^{[1
]}

Chen, Yuan ^{[1
]}

Xu, Zhenzhen ^{[1
]}

Ni, Qingqing ^{[2
,3
]}

机构：

[1] Anhui Polytech Univ, Coll Text & Garments, Wuhu 241000, Anhui, Peoples R China

[2] Zhejiang Prov Innovat Ctr Adv Text Technol, Shaoxing 312000, Zhejiang, Peoples R China

[3] Zhejiang Sci Tech Univ, Sch Mat Sci & Engn, Hangzhou 310018, Zhejiang, Peoples R China

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2023年 / 243卷

关键词：

Carbon fiber composites; Magnetron sputtering; Surface modification;

D O I：

10.1016/j.compscitech.2023.110224

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

To simultaneously improve the strength and toughness of carbon fiber-reinforced polymer composites (CFRPs) using the hybrid effect, a multi-size film with carbon/tantalum (C/Ta) hybrid structure was constructed on the surface of carbon fibers (CFs) by magnetron sputtering using carbon and tantalum as the target materials. Carbon fiber epoxy composites (CFEPs) were prepared by injection molding. The effects of the C/Ta hybrid interface layer on the interfacial bonding and mechanical properties of the CFEPs were analyzed by testing their in-plane shear and bending properties. The results show that the C/Ta hybrid interface layer structure can effectively improve the interfacial bonding and mechanical properties of the CFEP. The in-plane shear and flexural strengths of CFEP modified by double C/Ta magnetron sputtering were 63.53% and 33.15% higher than those of un-modified CFEP, respectively, the in-plane shear modulus increased by 1.53 times, and the bending modulus by 63.26%.

引用

页数：10

共 32 条

[1] A review of carbon fiber materials in automotive industry [J].

Ahmad, H. ;

Markina, A. A. ;

Porotnikov, M., V ;

Ahmad, F. .

INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE) 2020, 2020, 971

[2]

[Anonymous], 2010, ASTMD79010

[3]

[Anonymous], ASTMD3330: Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

[4]

[Anonymous], ASTMD5379/D5379M-05: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

[5] Magnetron sputtering - Milestones of 30 years [J].

Braeuer, G. ;

Szyszka, B. ;

Vergoehl, M. ;

Bandorf, R. .

VACUUM, 2010, 84 (12) :1354-1359

[6] High strength and high modulus carbon fibers [J].

Chae, Han Gi ;

Newcomb, Bradley A. ;

Gulgunje, Prabhakar V. ;

Liu, Yaodong ;

Gupta, Kishor K. ;

Kamath, Manjeshwar G. ;

Lyons, Kevin M. ;

Ghoshal, Sushanta ;

Pramanik, Chandrani ;

Giannuzzi, Lucille ;

Sahin, Korhan ;

Chasiotis, Ioannis ;

Kumar, Satish .

CARBON, 2015, 93 :81-87

[7] Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy [J].

Chevalier, J. ;

Camanho, P. P. ;

Lani, F. ;

Pardoen, T. .

COMPOSITE STRUCTURES, 2019, 209 :160-176

[8] Effect of tantalum carbide on the ablation behaviors of hafnium carbide coating for C/C composites under single and cyclic oxyacetylene torch environments [J].

Feng, Guanghui ;

Li, Hejun ;

Yao, Xiyuan ;

Hu, Dou ;

Yang, Li ;

Li, Bo ;

Lu, Jinhua .

SURFACE & COATINGS TECHNOLOGY, 2020, 400 (400)

[9] Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties [J].

Flege, Stefan ;

Hatada, Ruriko ;

Hanauer, Andreas ;

Ensinger, Wolfgang ;

Morimura, Takao ;

Baba, Koumei .

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017

[10] A review on manufacturing defects and their detection of fiber reinforced resin matrix composites [J].

Fu, Yutong ;

Yao, Xuefeng .

COMPOSITES PART C: OPEN ACCESS, 2022, 8

← 1 2 3 4 →