Investigating the potential of dihydroxystearic acid as feedstock for rigid polyurethane foam

Rigid polyurethane (PU) foam has been widely used for a multitude of applications, primarily as thermal insulation materials. With the exhortation of "green chemistry" and sustainable development, bio-based polyols are being introduced to replace the conventional petrochemical -based polyols. Hence, the use of 9, 10-dihydroxystearic acid (DHSA), derived from palm oil -based oleic acid, as a feedstock for rigid PU foam production was explored. In this study, the effects of the weight ratio percentage of DHSA on the characteristics of the resulting PU foams were investigated. The DHSA was utilized as a co-polyol to synthesize rigid PU foams by reacting with the diisocyanate compound, blowing agent and additives. In general, the effects of DHSA in the formulations on the quality of the foams were relatively similar to PU formulation without the addition of DHSA, particularly in terms of density, compressive strength, thermal conductivity, cell structure and dimensional stability. The remarkable effect of DHSA addition in the PU formulations was observed through the open PU cell content using a pycnometer and scanning electron microscopy (SEM). The addition of DHSA has the ability to open the cell structure of the resulting rigid PU foams. The open cell content increased notably from 6.83% to 90.99% when the DHSA content was increased from 0% to 50%. The ability of DHSA to produce open -cell rigid PU foam widens up the potential applications of rigid PU foams as sound absorption materials.