Upset Forging Temperature Effect on Structure and Tribological Properties of Sintered Al-7Fe-38Sn Alloy

被引：1

作者：

Rusin, N. M. ^{[1
]}

Skorentsev, A. L. ^{[1
]}

Likharev, V. E. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia

来源：

RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 01期

基金：

俄罗斯科学基金会;

关键词：

hybrid composite material; sintering; upset forging; structure; tribological properties; WEAR PROPERTIES; TIN; BEHAVIOR;

D O I：

10.1007/s11182-024-03082-8

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The paper focuses on upset forging of the sintered Al-7Fe-38Sn alloy in a closed mold and the process temperature, both affecting its structure and tribological properties. The Al-7Fe-38Sn composite consists of the hard (Al3Fe) and soft (Sn) phases in 17 and 20 volume fractions, respectively. It is found that <= 250 degrees forging has a negative effect on the composite plasticity, whereas at 300 degrees C, the plasticity restores and even grows after multiple compression. Tensile strength of the composite remains stable and is similar to 130 MPa. It is found that Al3Fe phase particles intensively dissolve during heating up to the forging temperature in the presence of liquid tin.

引用

页码：9 / 16

页数：8

共 44 条

[21] Effect of starting powder properties on the structure and mechanical characteristics of Al–8Cr–1.5Fe alloy for high-temperature applications
O. D. Neikov
A. I. Sirko
N. P. Zakharova
N. A. Efimov
G. I. Vasil’eva
A. O. Sharovskii
A. V. Samelyuk
V. A. Goncharuk
R. K. Ivashchenko
Powder Metallurgy and Metal Ceramics, 2013, 52 : 144 - 153
[22] Preparation and thermoelectric properties of sintered n-type K8M8Sn38 (M = Al, Ga and In) with the type-I clathrate structure
Hayashi, M.
Kishimoto, K.
Akai, K.
Asada, H.
Kishio, K.
Koyanagi, T.
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2012, 45 (45)
[23] EFFECT OF CO AND NI ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES AT ROOM AND ELEVATED TEMPERATURE OF AN Al-7%Si ALLOY
Bogdanoff, Toni
Dahle, Arne K.
Seifeddine, Salem
INTERNATIONAL JOURNAL OF METALCASTING, 2018, 12 (03) : 434 - 440
[24] Effect of High Temperature Oxidation on the Mechanical Properties of Zr-1Nb-1Sn-0.1Fe Alloy Cladding Tubes
Lee, Eun Kyu
Hong, Sun Ig
KOREAN JOURNAL OF METALS AND MATERIALS, 2013, 51 (01): : 15 - 24
[25] Effect of extrusion temperature on microstructure, mechanical properties and corrosion resistance of Mg-6Sn-3Al-1Zn alloy
Wei, Fuan
Zhou, Shihao
Wang, Jinhui
Shi, Bo
Jin, Peipeng
Ding, Yong
Guo, Xing
MATERIALS TODAY COMMUNICATIONS, 2023, 37
[26] Effect of boron and carbon addition on microstructure and tribological properties of metastable beta titanium alloy, Ti-10V-2Fe-3Al
Banoth, Ravinaik
Chandravanshi, V.
Bhattacharjee, A.
Nandy, T. K.
Rao, G. V. S. Nageswara
MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2700 - 2707
[27] Temperature effects on microstructure and mechanical properties of sintered high-entropy equiatomic Ti20V20Al20Fe20Cr20alloy for aero-gear application
Afolabi, Ayodeji Ebenezer
Popoola, Olawale
Popoola, Abimbola P. I.
Aramide, Fatai O.
Oloruntoba, Daniel T.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (11-12) : 3563 - 3570
[28] Effect of multi-pass friction stir processing on microstructure and mechanical properties of cast Al-7Fe-5Ni alloy
Soustani, Mojtaba Fekri
Taghiabadi, Reza
Jafarzadegan, Mostafa
Farahan, Maryam Vasheghani
MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
[29] Effect of laser beam scanning speed during SLM on the structure and physical-mechanical properties of Al-15Sn-5Pb alloy
Skorentsev, A. L.
Akimov, K. O.
Rusin, N. M.
Likharev, V. E.
Dmitriev, A. I.
RUSSIAN PHYSICS JOURNAL, 2025, : 221 - 228
[30] Influence of Isothermal Forging Temperature on Microstructure and Tensile Properties of Ti-5.8Al-4.0Sn-4.0Zr-0.7Nb-0.4Si-1.5Ta Near-α Titanium Alloy
Wang, Tao
Guo, Hongzhen
Zhang, Jianhua
Yao, Zekun
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 153 - 157

← 1 2 3 4 5 →