MODELING OF CUTTING FORCE AND POWER CONSUMPTION USING ANN AND RSM METHODS IN TURNING OF AISI D3: COMPARATIVE STUDY AND PRECISION BENEFIT

被引：1
作者：
Safi, Khaoula [1 ]
Yallese, Mohamed Athmane [1 ]
Belhadi, Salim [1 ]
Mabrouki, Tarek [2 ]
Chihaoui, Salim [1 ]
机构：
[1] Univ 8 Mai 1945, Lab LMS, Guelma, Algeria
[2] Univ Tunis El Manar, ENIT, Lab MAI, Tunis, Tunisia
来源：
JOURNAL OF THEORETICAL AND APPLIED MECHANICS-BULGARIA | 2023年 / 53卷 / 01期
关键词：
AISI D3; turning; cutting force; coated carbide (CVD); RSM; ANN; RESPONSE-SURFACE METHODOLOGY; ARTIFICIAL NEURAL-NETWORKS; MACHINING PARAMETERS; HARDENED STEEL; OPTIMIZATION; ROUGHNESS; TOOL; REGRESSION; PREDICTION; WEAR;
D O I：
10.55787/jtams.23.53.1.49
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The present work deals with the optimization of cutting pa-rameters when turning D3 steel using a CVD multi-layer coated carbide tool (Al2O3+TiC+TiCN). For that, response surface methodology (RSM) and ar-tificial neural network (ANN) were adopted for the modeling of cutting force (Fz) and cutting power evolutions (Pc). The applied precited approaches were also compared and their results were discussed. Moreover, a design of exper-imental (DoF) based on Taguchi L16 (4 perpendicular to 3 2 perpendicular to 1) method was adopted. This has helped to illustrate the relationship between cutting parameters (tool radius, cutting speed, feed rate and cutting depth) and selected responses which are cutting force and cutting power. The results revealed that the ANN and RSM exhibited very good accuracy with experimental data. However, the ANN pre-diction model provides the maximum benefit in terms of precision compared to the RSM model. For (Fz and Pc) the benefit is (7.5 and 16.3)%, respectively.
引用
收藏
页码：49 / 65
页数：17
相关论文
共 26 条
[1]   Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method [J].
Asilturk, Ilhan ;
Cunkas, Mehmet .
EXPERT SYSTEMS WITH APPLICATIONS, 2011, 38 (05) :5826-5832
[2]   Modelling of cutting forces and surface roughness evolutions during straight turning of Stellite 6 material based on response surface methodology, artificial neural networks and support vector machine approaches [J].
Ben Fathallah, B. ;
Saidi, R. ;
Belhadi, S. ;
Yallese, M. A. ;
Mabrouki, T. .
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2021, 15 (04) :8540-8554
[3]   Combined effects of abrasive type and cooling mode on fatigue resistance of AISI D2 ground surface [J].
Ben Fathallah, Brahim ;
Braham, Chedly ;
Sidhom, Habib .
INTERNATIONAL JOURNAL OF FATIGUE, 2020, 138
[4]   Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites [J].
Bhushan, Rajesh Kumar .
JOURNAL OF CLEANER PRODUCTION, 2013, 39 :242-254
[5]  
Bouchelaghem H, 2007, MECHANIKA, P57
[6]   Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods [J].
Chabbi, A. ;
Yallese, M. A. ;
Nouioua, M. ;
Meddour, I. ;
Mabrouki, T. ;
Girardin, Francois .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (5-8) :2267-2290
[7]   Effect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: An optimization approach [J].
Chinchanikar, Satish ;
Choudhury, S. K. .
MEASUREMENT, 2013, 46 (04) :1572-1584
[8]  
Doniavi A., 2007, J APPL SCI, V7, P2509, DOI DOI 10.3923/JAS.2007.2509.2513
[9]   Analysis of Machinability During Hard Turning of Cold Work Tool Steel (Type: AISI D2) [J].
Gaitonde, V. N. ;
Karnik, S. R. ;
Figueira, Luis ;
Davim, J. Paulo .
MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (12) :1373-1382
[10]   Effect of Machining Parameters and Optimization of Temperature Rise in Turning Operation of Aluminium-6061 Using RSM and Artificial Neural Network [J].
Gopal, Mahesh .
PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2021, 65 (02) :141-150
123