Seismic retrofit of structures using added steel column friction dampers

被引:6
作者
Javidan, Mohammad Mahdi [1 ]
Naeem, Asad [2 ]
Kim, Jinkoo [1 ]
机构
[1] Sungkyunkwan Univ, Dept Global Smart City, Suwon, South Korea
[2] Balochistan Univ Informat Technol, Dept Civil & Architectural Engn, Quetta, Pakistan
基金
新加坡国家研究基金会;
关键词
friction damper; nonlinear time history analysis; seismic dampers; seismic performance; seismic retrofit; PERFORMANCE EVALUATION; FRAME;
D O I
10.12989/scs.2023.49.3.257
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this study, the feasibility and applicability of a friction damper with a vertical installation scheme are investigated. This device is composed of a steel section and two friction hinges at both ends which dissipate seismic energy. Due to its small width and vertical installation scheme, the proposed damper can minimize the interference with architectural functions. To evaluate the performance of the proposed damper, its mechanical behavior is theoretically evaluated and the required formulas for the yield strength and elastic stiffness are derived. The theoretical formulas are verified by establishing the analytical model of the damper in the SAP2000 software and comparing their results. To further investigate the performance of the developed damper, the provided analytical model is applied to a 4-story reinforced concrete (RC) structure and its performance is evaluated before and after retrofit under the Maximum Considered Earthquake (MCE) hazard level. The seismic performance is thoroughly evaluated in terms of maximum interstory drift ratio, displacement time history, residual displacement, and energy dissipation. The results show that the proposed damper can be efficiently used to protect the structure against seismic loads.
引用
收藏
页码:257 / 270
页数:14
相关论文
共 50 条
[41]   Seismic performance of steel plate slit-friction hybrid dampers [J].
Lee, Joonho ;
Kang, Hyungoo ;
Kim, Jinkoo .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2017, 136 :128-139
[42]   Seismic Retrofit of Deficient RC Structures with Internal Steel Frames [J].
Ozcelik, Ramazan ;
Akpinar, Ugur ;
Binici, Baris .
ADVANCES IN STRUCTURAL ENGINEERING, 2011, 14 (06) :1205-1222
[43]   Predictive control of seismic structures with semi-active friction dampers [J].
Lu, LY .
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2004, 33 (05) :647-668
[44]   Improving seismic performance of framed structures with steel curved dampers [J].
Hsu, H. -L. ;
Halim, H. .
ENGINEERING STRUCTURES, 2017, 130 :99-111
[45]   Seismic retrofit of deficient exterior RC beam-column joints using steel plates and angles [J].
Shoukry, Mohie E. ;
Tarabia, Ahmed M. ;
Abdelrahman, Mahmoud Z. .
ALEXANDRIA ENGINEERING JOURNAL, 2022, 61 (04) :3147-3164
[46]   Seismic retrofit of exterior beam-column joints using steel angles connected by PT bars [J].
Khodaei, Mehdi ;
Saghafi, Mohammad Hossein ;
Golafshar, Ali .
ENGINEERING STRUCTURES, 2021, 236
[47]   Machine learning-based design of a seismic retrofit frame with spring-rotational friction dampers [J].
Gharagoz, Masoum M. ;
Noureldin, Mohamed ;
Kim, Jinkoo .
ENGINEERING STRUCTURES, 2023, 292
[48]   Conceptual study of an innovative friction damper for the seismic retrofit of precast RC structures with poor connections [J].
Grossi, Eleonora ;
Zerbin, Matteo ;
Aprile, Alessandra ;
De Risi, Raffaele ;
De Luca, Flavia .
STRUCTURES, 2024, 67
[49]   Investigation of low-disturbance seismic retrofit method for steel column bases using curved members [J].
Lin, Kun-Sian ;
Kurata, Masahiro ;
Kawasaki, Yutaro ;
Kitatani, Yoshio .
JAPAN ARCHITECTURAL REVIEW, 2024, 7 (01)
[50]   Seismic retrofit of a RC building using metallic yielding dampers: a case study [J].
Ferraioli, Massimiliano ;
Di Lauro, Gennaro ;
Crisci, Pasquale ;
Laezza, Gianfranco ;
Lavino, Angelo ;
Bellantoni, Carolina .
XIX ANIDIS CONFERENCE, SEISMIC ENGINEERING IN ITALY, 2023, 44 :982-989