Extraction of selected benzothiazoles, benzotriazoles and benzenesulfonamides from environmental water samples using a home-made sol-gel silica-based mixed-mode zwitterionic sorbent modified with graphene

A novel sol-gel silica-based mixed-mode zwitterionic sorbent modified with graphene microparticles was synthesized. Thanks to the inclusion of multiple functional groups and graphene microparticles to exert a wide range of intermolecular/interionic interactions including dipole-dipole interactions, ion-exchange interactions and pi-pi interactions, the sorbent showed high retention in the solid-phase extraction (SPE) of benzothiazoles, benzotriazoles and benzenesulfonamides. The SPE protocol was optimized in terms of pH, sample loading volume and elution conditions using liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS). The method based on SPE followed by LC-HRMS was validated. Apparent recoveries at two levels of concentration were in the range from 48 to 85% (in most cases) in matrices such as influent wastewater, matrix effect was lower than +/- 30% in most cases, method detection and quantification limits being lower than 20 ng/L and repeatability and reproducibility between days were lower than 18% (n = 4). River, effluent and influent wastewaters samples were analyzed, obtaining concentrations ranging from 3 to 175 ng/L in river samples, from 12 to 499 ng/L in effluent samples and from 15 to 632 ng/L in influent samples, when the compounds were above the method quantification limits.