E-beam irradiation-induced synthesis of hydroxyethyl cellulose/ (Cu2O-rGO)/BiVO4-based nanocomposite for photocatalytic remediation of wastewater under visible light

Using E-beam irradiation as an eco-friendly technique for initiation and crosslinking, a series of Hydroxyethyl Cellulose-poly vinyl alcohol copolymer hydrogels were synthesized as templates for cuprous oxide (Cu2O), reduced graphene oxide (rGO) and bismuth vanadate (BiVO4) nanoparticles to be used as nanocomposites photocatalysts for methylene blue (MB) dye decolorization using visible light. Preparation conditions were optimized to ensure the construction of a good network architecture and therefore the highest gelation degree. For the preparation of (Cu2O@rGO)/BiVO4 nanocomposites, a series of rGO was decorated by Cu2O using the precipitation method, followed by mixing with BiVO4 which was synthesized hydrothermally. (EDX), (XRD), (TEM), and (SEM) were used for nanoparticle characterization. The thermal characteristics of the fabricated nanocomposites were evaluated using thermal gravimetric analysis. The presence of rGO enhanced the decol-orization efficiency of MB about 20 % higher than that of (HEC-PVA)/Cu2O which achieves only (59 %) decolorization efficiency. After the addition of BiVO4 NPs, the decolorization efficiency increased to reach 90 % after 150 min at pH 11 using a 10 ppm MB solution. The developed (HEC-PVA)/(Cu2O@rGO)/BiVO4 photo -catalyst exhibits efficient reusability for 5 cycles. Treated dyed water shows a germination index (GI) of 82 % suggesting its suitability for irrigation of playgrounds and gardens.