Effect of variable rate non-isothermal aging on microstructure and properties of Al-Zn-Mg-Cu alloy

被引:24
作者
Zhao, Hui [1 ]
Ye, Lingying [1 ]
Cheng, Quanshi [1 ,2 ]
Kang, Yuan [2 ,3 ]
Zhang, Wenjing [2 ,3 ]
机构
[1] Cent South Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China
[2] Tianjin Key Lab Fastening Technol, Tianjin 300300, Peoples R China
[3] Aerosp Precis Prod Co Ltd, Tianjin 300300, Peoples R China
关键词
Non-isothermal aging; 7055 aluminum alloy; Precipitates; Corrosion resistance; Transmission electron microscope; STRESS-CORROSION CRACKING; 7075; ALUMINUM-ALLOY; MECHANICAL-PROPERTIES; HEAT-TREATMENT; INTERGRANULAR CORROSION; HYDROGEN EMBRITTLEMENT; PRECIPITATE EVOLUTION; BEHAVIOR; STRENGTH; RESISTANCE;
D O I
10.1016/j.matchar.2023.112715
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Variable rate non-isothermal aging (VR-NIA) treatment by changing the heating and cooling rates is proposed and applied to 7055 aluminum alloy to optimize the mechanical properties and corrosion resistance. The investigated 7055 aluminum alloy undergone two-stage solid solution is heated from 100 degrees C to 160 degrees C at a rate of 20 degrees C/h, then heated to 210 degrees C at a rate of 60 degrees C/h, and finally cooled to 100 degrees C according to the symmetrical temperature route, the hardness and tensile strength can reach 173.3 HV and 654.6 MPa, respectively, and the electrical conductivity is able to reach 38.6 %IACS. At the same time, improved corrosion resistance is obtained, the maximum depth of intergranular corrosion (IGC) is 29.4 mu m, the 48 h exfoliation corrosion (EXCO) grade is EA, and the stress corrosion sensitivity index (ISSRT) is 1.8%. The results of electrochemical tests show that the open circuit potential (OCP) of VR-NIA alloy is-764.2 mV, the corrosion potential (Ecorr) is-715.3 mV, and the corrosion current density (Icorr) is 4.6 x 10-8 A/cm2. Microstructure observation shows that GPI zones, GPII zones and a small number of eta' phases are formed during the heating process of 100 -> 160 degrees C, which enhances the mechanical properties of the alloy; in the process of 160 -> 210 -> 160 degrees C, small-sized precipitates dissolve back, and part of the large-sized eta' phases grow and transform into eta phases. At the same time, the grain boundary precipitates (GBPs) change from continuous to discontinuous distribution, forming a precipitation-free zone (PFZ) with a suitable width, which greatly improves the electrical conductivity and corrosion resistance of the alloy. In the process of 160 -> 100 degrees C, the GPI zones are re-precipitated, and more eta phases are formed from the eta' phases without remarkable coarsening. Enhanced performance can be achieved in a relatively shorter time through VR-NIA, behaving with greater advantage over constant-rate non-isothermal aging.
引用
收藏
页数:16
相关论文
共 73 条
[1]   VOLUME FREE ENERGY CHANGE ASSOCIATED WITH PRECIPITATE NUCLEATION [J].
AARONSON, HI ;
KINSMAN, KR ;
RUSSELL, KC .
SCRIPTA METALLURGICA, 1970, 4 (02) :101-&
[2]   Synchrotron-based holotomography and X-ray fluorescence study on the stress corrosion cracking behavior of the peak-aged 7075 aluminum alloy [J].
Altenbach, Christoph ;
Schnatterer, Christian ;
Mercado, Ulises Alfaro ;
Suuronen, Jussi-Petteri ;
Zander, Daniela ;
Requena, Guillermo .
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 817
[3]   Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective [J].
Azarniya, Abolfazl ;
Taheri, Ali Karimi ;
Taheri, Kourosh Karimi .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 781 :945-983
[4]   Microstructure Evolution and the Resulted Influence on Localized Corrosion in Al-Zn-Mg-Cu Alloy during Non-Isothermal Ageing [J].
Chen, Jun-Zhou ;
Li, Guo-Ai ;
Cai, Xin ;
Jiang, Jian-Tang ;
Shao, Wen-Zhu ;
Yang, Li ;
Zhen, Liang .
MATERIALS, 2018, 11 (05)
[5]   Investigation of precipitation behavior and related hardening in AA 7055 aluminum alloy [J].
Chen, Junzhou ;
Zhen, Liang ;
Yang, Shoujie ;
Shao, Wenzhu ;
Dai, Shenglong .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 500 (1-2) :34-42
[6]   HYDROGEN EMBRITTLEMENT AND TRAPPING IN AL-6-PERCENT-ZN-3-PERCENT-MG [J].
CHRISTODOULOU, L ;
FLOWER, HM .
ACTA METALLURGICA, 1980, 28 (04) :481-487
[7]   An atomic scale structural investigation of nanometre-sized η precipitates in the 7050 aluminium alloy [J].
Chung, Tsai-Fu ;
Yang, Yo-Lun ;
Shiojiri, Makoto ;
Hsiao, Chien-Nan ;
Li, Wei-Chih ;
Tsao, Cheng-Si ;
Shi, Zhusheng ;
Lin, Jianguo ;
Yang, Jer-Ren .
ACTA MATERIALIA, 2019, 174 :351-368
[8]  
Diehl D., 2020, J. Mater. Sci. Eng., V10, P53
[9]   Recent developments in advanced aircraft aluminium alloys [J].
Dursun, Tolga ;
Soutis, Costas .
MATERIALS & DESIGN, 2014, 56 :862-871
[10]   Investigation of fine scale precipitates in Al-Zn-Mg alloys after various heat treatments [J].
Engdahl, T ;
Hansen, V ;
Warren, PJ ;
Stiller, K .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 327 (01) :59-64