Analysis of Energy Losses in the Novel Distributed Power Supply System for Trams

The traction substation in conventional power supply systems for trams is a bottleneck of the system. It requires the connection with medium-voltage grid, demands high values of instant power and its centralized topology generates additional energy losses. Since the availability of low-power photovoltaic (PV) generation is increasing in the utility system, we propose to replace conventional substations with a distributed system of low-power devices cooperating with low-voltage grid and PV installations owned by individual households. The proposed in this article distributed power supply system for trams (DPSS-T) consists of multiple traction aggregators (TAs) equipped with energy storage devices (ESDs) which are distributed along the tram line. In order to evaluate the benefits of applying DPSS-T this proposed system was compared with the conventional topology regarding the energy losses in terms of annual operation. Moreover, the following aspects have been studied for the wide range EDS sizes and PV generation: PV energy injection into the power utility system, the utilization of installed ESD, and the contribution of PV generation in energy consumed by traction vehicles. At the same time, the energy management for this new topology has been proposed. The ESDs are charged with relatively low power, between tram runs and discharged with full power during the runs. The suggested energy management eliminates peaks in substation power demand. The obtained results show that despite the fact that the proposed DPSS-T is supplied from low-voltage grid the energy losses are reduced by 58%-69%.