Historical review and future prospect for researches on very high cycle fatigue of metallic materials

被引:18
|
作者
Sakai, Tatsuo [1 ,2 ]
机构
[1] Ritsumeikan Univ, Res Org Sci & Technol, Kusatsu, Japan
[2] Ritsumeikan Univ, Res Org Sci & Technol, 525 8577 Japan, 1-1-1 Nojihigashi, Kusatsu, Shiga 5258577, Japan
关键词
crack initiation mechanism; duplex S-N characteristics; future prospect; historical review; metallic materials; very high cycle fatigue; SUBSURFACE CRACK INITIATION; ROLLING-CONTACT FATIGUE; COMPETING FAILURE MODES; HIGH-STRENGTH STEELS; CR-NI-STEELS; BEARING STEEL; VHCF REGIME; PROPAGATION PROPERTIES; DEFORMATION-BEHAVIOR; FRACTURE-MECHANICS;
D O I
10.1111/ffe.13885
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Since the first paper on the fatigue of metallic materials by J. Albert in 1837, tremendous numbers of papers have been published in various journals by many researchers all over the world. Based on such a long history, several papers on the very high cycle fatigue (VHCF) in the life-time longer than 10(7) cycles had appeared in some journals during the period of 1980's. One characteristic finding in these works is the fact that the metallic material can fail even at the stress level lower than the conventional fatigue limit. This fact means that the conventional fatigue design of mechanical structures cannot give the safety of the practical products in the very high cycle regime. Due to this fact, fatigue properties of structural materials in very long life regime has become an important subject; and a lot of studies have been carried out, and many important results have been accumulated until now. Typical aspects on VHCF property are summarized as follows: (1) the fatigue crack tends to occur around the interior inclusion, (2) fine granular area (FGA) is formed around such an inclusion, and (3) duplex S-N characteristics appear in the VHCF regime. In this paper, a brief historical review together with the future prospect on the very high cycle fatigue of metallic materials is attempted for the sake of reference to facilitate the research in this area.
引用
收藏
页码:1217 / 1255
页数:39
相关论文
共 50 条
  • [41] Granular bright fact crack propagating under very high cycle fatigue
    Li, Y. -D.
    Xu, N.
    Ma, H.
    Li, Y. -Z.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (15) : 1894 - 1902
  • [42] A fatigue life prediction approach to surface and interior inclusion induced high cycle and very-high cycle fatigue for bainite/martensite multiphase steel
    Fan, Yusong
    Gao, Guhui
    Xu, Xiang
    Liu, Rong
    Zhang, Fengming
    Gui, Xiaolu
    INTERNATIONAL JOURNAL OF FATIGUE, 2025, 192
  • [43] An energy-CP-combined model for predicting the fatigue life of polycrystalline materials under high cycle and very high cycle fatigue
    Li, Bin
    Chen, Chen
    Qin, Zhi
    Xue, Hongqian
    ENGINEERING FRACTURE MECHANICS, 2023, 291
  • [44] Failure mechanism and life correlation of Inconel 718 in high and very high cycle fatigue regimes
    Yang, Yi-Fan
    Hu, Hua-Yan
    Min, Lin
    Sun, Qian-Tao
    Song, Miao
    Zhu, Ming-Liang
    Wen, Jian-Feng
    Tu, Shan-Tung
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 175
  • [45] Application of ultrasonic fatigue technology in very-high-cycle fatigue testing of aviation gas turbine engine blade materials: A review
    Zhao, Jiucheng
    Wan, Jie
    Zhang, Shizhong
    Yan, Chuliang
    Zhao, Hongwei
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2024, 67 (05) : 1317 - 1363
  • [46] The effect of the residual stresses generated by surface finishing methods on the very high cycle fatigue behavior of matrix HSS
    Shimatani, Yuuji
    Shiozawa, Kazuaki
    Nakada, Takehiro
    Yoshimoto, Takashi
    Lu, Liantao
    INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (02) : 122 - 131
  • [47] Effects of Loading Frequency and Loading Type on High-Cycle and Very-High-Cycle Fatigue of a High-Strength Steel
    Hu, Yuanpei
    Sun, Chengqi
    Xie, Jijia
    Hong, Youshi
    MATERIALS, 2018, 11 (08)
  • [48] Effects of inclusions on the very high cycle fatigue behaviour of steels
    Pineau, Andre
    Forest, Samuel
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (11) : 1694 - 1707
  • [49] A continuous testing method for fatigue strength evaluation in high cycle and very high cycle regimes
    Wu, Han
    Wang, Saisai
    Xu, Wei
    Sun, Chengqi
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 188
  • [50] High/very high cycle fatigue behaviors of medium carbon pearlitic wheel steels and the effects of microstructure and non-metallic inclusions
    Li, Zhao-dong
    Zhou, Shi-tong
    Yang, Cai-fu
    Yong, Qi-long
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764