Power cable fired by transient arcing below the action value of relay protection: An analysis of a medium-voltage cable joint breakdown fault

被引：13

作者：

Hu, Ran ^{[1
,2
]}

Liu, Gang ^{[1
]}

Huang, Chenglong ^{[1
]}

Xu, Zhifeng ^{[2
]}

Zhou, Wenqing ^{[1
]}

机构：

[1] South China Univ Technol, Sch Elect Power Engn, Guangzhou 510640, Guangdong, Peoples R China

[2] Shenzhen Power Supply Bur CO LTD, Shenzhen 518001, Guangdong, Peoples R China

来源：

ENGINEERING FAILURE ANALYSIS | 2023年 / 145卷

关键词：

Electrical engineering; Cable joint; Composites; Finite elements analysis; Erosion; Management deficiency; Optimized protection action conditions;

D O I：

10.1016/j.engfailanal.2022.107028

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Cable joint breakdown accidents have occurred frequently in recent years and have gradually become an important concern of the power maintenance department. The study of the fault development process of the cable joint is helpful to detect and diagnose in advance, so as to avoid the expansion of the accident. In this paper, a breakdown fault of 20 kV damp three-core cable joint was investigated. Firstly, the recorded fault waveform was analyzed, and the fault cable joint sample was disassembled. Then, the circuit simulation model was established to calculate the short-circuit resistance, which aimed to reveal the dynamic characteristics of the short-circuit resistance of the composite interface for the damp joint. Finally, the effect of moisture on the electric field distortion of the interface and the thermal ablation damage effect of the transient short-circuit current on the copper mesh were discussed by the finite element method. This paper reveals the phenomenon of transient grounding faults arising from moisture at the internal interface of cable joint, which may damage the grounding protection line of the joint and affect the sensitivity of the protective device. The method for analyzing the breakdown fault case of damp cable joint presented in this paper can provide reference and suggestions for the investigation and solution in similar cases.

引用

页数：14

共 28 条

[1]

Abbasi V., 2018, Iranian Journal of Electrical and Electronic, Engineering, V14, P270

[2]

Afotey S, 2020, PROC IEEE INT SYMP, P898, DOI [10.1109/ISIE45063.2020.9152389, 10.1109/isie45063.2020.9152389]

[3]

Bernards R, 2015, 2015 IEEE EINDHOVEN POWERTECH

[4] Optimal Control and Operation of Grid-Connected Photovoltaic Production Units for Voltage Support in Medium-Voltage Networks [J].

Bonfiglio, Andrea ;

Brignone, Massimo ;

Delfino, Federico ;

Procopio, Renato .

IEEE TRANSACTIONS ON SUSTAINABLE ENERGY, 2014, 5 (01) :254-263

[5] Evaluation of the power frequency magnetic field generated by three-core armored cables through 3D finite element simulations [J].

Carlos del-Pino-Lopez, Juan ;

Cruz-Romero, Pedro ;

Carlos Bravo-Rodriguez, Juan .

ELECTRIC POWER SYSTEMS RESEARCH, 2022, 213

[6] Ageing mechanisms and diagnostics for power cables - An overview [J].

Densley, J .

IEEE ELECTRICAL INSULATION MAGAZINE, 2001, 17 (01) :14-22

[7]

Elayyan HSB, 2005, IEEE T DIELECT EL IN, V12, P1125, DOI 10.1109/TDEI.2005.1561792

[8] Charge-Simulation-Based Electric Field Analysis and Electrical Tree Propagation Model with Defects in 10 kV XLPE Cable Joint [J].

He, Jiahong ;

He, Kang ;

Cui, Longfei .

ENERGIES, 2019, 12 (23)

[9] Study on a 110 kV combined prefabricated joint fault caused by premature failure of grounding grid [J].

Huang, Jiasheng ;

Ye, Zhechi ;

Zhang, Gengbin ;

Bao, Shuzhen ;

Wang, Pengyu ;

Liu, Gang .

ENGINEERING FAILURE ANALYSIS, 2022, 141

[10] Controlling the thermal environment of underground cable lines using the pavement surface radiation properties [J].

Klimenta, Dardan ;

Perovic, Bojan ;

Klimenta, Jelena ;

Jevtic, Milena ;

Milovanovic, Milos ;

Krstic, Ivan .

IET GENERATION TRANSMISSION & DISTRIBUTION, 2018, 12 (12) :2968-2976

← 1 2 3 →