Stacking sequence optimization of composite tubes submitted to crushing using the discrete ply model (DPM)

被引：3
作者：
Anand, S. [1 ]
Chambe, J-E [1 ]
Bouvet, C. [1 ]
Rivallant, S. [1 ]
机构：
[1] Univ Toulouse, Inst Clement Ader, ISAE SUPERO UPS IMT Mines Albi INSA, 10 Av E Belin, F-31055 Toulouse 4, France
来源：
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2024年 / 31卷 / 04期
关键词：
Discrete ply model; crushing; specific energy absorption; finite element model; ENERGY-ABSORPTION; SIMULATION; BEHAVIOR;
D O I：
10.1080/15376494.2022.2123579
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The purpose of this study is to study the applicability of Discrete Ply Modeling (DPM) to crushing of composite tubes and to study the effect of stacking sequence and trigger geometry on the Specific Energy Absorption (SEA). The model was first validated with experimental results after which various stacking sequences were simulated to optimize it with an aim to increase the SEA. The stacking sequence [90/0(2)/90/0(3)/90/0/90] performed the best in terms of SEA value. As a result, the confidence of the DPM has been proven for some draping sequences but seems to be less confident to simulate the trigger effect.
引用
收藏
页码：820 / 833
页数：14
相关论文
共 20 条
  • [1] Discrete ply modelling of open hole tensile tests
    Achard, Victor
    Bouvet, Christophe
    Castanie, Bruno
    Chirol, Clement
    [J]. COMPOSITE STRUCTURES, 2014, 113 : 369 - 381
  • [2] Discrete ply model of circular pull-through test of fasteners in laminates
    Adam, Louis
    Bouvet, Christophe
    Castanie, Bruno
    Daidie, Alain
    Bonhomme, Elodie
    [J]. COMPOSITE STRUCTURES, 2012, 94 (10) : 3082 - 3091
  • [3] A delay damage mesomodel of laminates under dynamic loading:: basic aspects and identification issues
    Allix, O
    Feissel, P
    Thévenet, P
    [J]. COMPUTERS & STRUCTURES, 2003, 81 (12) : 1177 - 1191
  • [4] Low velocity impact modelling in laminate composite panels with discrete interface elements
    Bouvet, Christophe
    Castanie, Bruno
    Bizeul, Matthieu
    Barrau, Jean-Jacques
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (14-15) : 2809 - 2821
  • [5] Strain Rate Effects on the Energy Absorption of Rapidly Manufactured Composite Tubes
    Brighton, Aaron
    Forrest, Mark
    Starbuck, Mike
    Erdman, Donald
    Fox, Bronwyn
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (20) : 2183 - 2200
  • [6] Energy absorption capacity of composite thin-wall circular tubes under axial crushing with different trigger initiations
    Chambe, J. E.
    Bouvet, C.
    Dorival, O.
    Ferrero, J. F.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (10) : 1281 - 1304
  • [7] The crush behaviour of carbon fibre angle-ply reinforcement and the effect of interlaminar shear strength on energy absorption capability
    Daniel, L
    Hogg, PJ
    Curtis, PT
    [J]. COMPOSITES PART B-ENGINEERING, 2000, 31 (05) : 435 - 440
  • [8] LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen
    Feraboli, Paolo
    Wade, Bonnie
    Deleo, Francesco
    Rassaian, Mostafa
    Higgins, Mark
    Byar, Alan
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (11) : 1809 - 1825
  • [9] CRUSHING MECHANISM OF CARBON-FIBER PEEK COMPOSITE TUBES
    HAMADA, H
    RAMAKRISHNA, S
    SATOH, H
    [J]. COMPOSITES, 1995, 26 (11): : 749 - 755
  • [10] Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure
    Hongkarnjanakul, N.
    Bouvet, C.
    Rivallant, S.
    [J]. COMPOSITE STRUCTURES, 2013, 106 : 549 - 559
12