Microstructure and Mechanical Properties of the Ferritic-Martensitic Steel EK-181 After Warm Isothermal Forging

被引：0

作者：

Linnik, V. V. ^{[1
]}

Polekhina, N. A. ^{[2
]}

Litovchenko, I. Yu. ^{[2
]}

Spiridonova, K. V. ^{[2
]}

Chernov, V. M. ^{[3
]}

Leontyeva-Smirnova, M. V. ^{[3
]}

机构：

[1] Natl Res Tomsk State Univ, Tomsk, Russia

[2] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia

[3] Bochvar High Technol Res Inst Inorgan Mat, Moscow, Russia

来源：

RUSSIAN PHYSICS JOURNAL | 2023年 / 66卷 / 4期

关键词：

ferritic-martensitic steels; warm multidirectional forging; grain refinement; substructure; mechanical properties; THERMOMECHANICAL TREATMENT; GRAIN-REFINEMENT; EVOLUTION;

D O I：

10.1007/s11182-023-02954-9

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The features of the microstructure and mechanical properties of the ferritic-martensitic steel EK-181 after warm isothermal forging in the ferritic region (tempforming) with the strain degree e & AP; 1.3 are studied. The formation of an inhomogeneous fragmented structure as a result of this processing is shown. The carbide subsystem does not change during processing. The mechanical properties of the steel have been studied under the conditions of tensile tests at 20 and 650 & DEG;C accompanied by the microhardness measurements. It is shown that warm isothermal forging leads to some increase in the strength properties at room temperature. At an elevated temperature (650 & DEG;C), the strength properties are comparable to those after traditional heat treatment (quenching and high-temperature tempering). The microhardness of steel after warm isothermal forging varied over the sample cross section from 2.7 GPa to 3.1 GPa. Tempering after multi-directional forging of the steel decreased its strength, but improved the plastic properties. The relationship between the microstructure and the mechanical properties of the EK-181 steel after isothermal forging in the ferritic region is discussed.

引用

页码：404 / 409

页数：6

共 18 条

[1] Microstructure and Mechanical Properties of Ferritic-Martensitic Steel EP-823 after High-Temperature Thermomechanical Treatment [J].

Almaeva, K. V. ;

Polekhina, N. A. ;

Linnik, V. V. ;

Litovchenko, I. Yu. .

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167

[2] Microstructure and Strengthening Mechanisms in an HSLA Steel Subjected to Tempforming [J].