Laboratory investigations on the thermo-mechanical behaviour of an energy pile group operated in heat release mode

Compared to the single energy pile, the thermo-mechanical behavior of pile group become more complicated due to mutual influences of different piles. A model test device of pile group with 2 x 2 layout was built to study the thermo-mechanical characteristics of pile group with different number of energy piles, inlet temperatures and connection forms of buried pipes. The results show that compared to single energy pile, the energy pile group mode will lead to the decrease of heat exchange performance and the increase of pile tip soil pressure and pile head displacement. But, the side friction and axial force of pile will decrease as a result of pile group effect. Meanwhile, increasing the inlet temperature can enhance heat exchange characteristics of pile group, but it will also result in the increase of the soil temperature, pile head displacement, pile tip soil pressure, pile shaft axial force and pile side friction. Additionally, reducing the number of energy piles in pile group can improve the heat exchange rate per unit pile depth, but the total heat transfer amount of energy pile group will decrease. With the increase of the number of energy pile in pile group, the temperature change and pile head displacement of the pile increase, but the pile side friction and pile body axial force decrease. Under current experimental conditions, the pile head displacement and pile body axial force in parallel connection mode are larger than those in series connection modes, and the pile body excess temperature is the smallest in parallel mode of four energy piles and the largest in series mode of four energy piles. For the series connection mode, the heat exchange performance, pile body excess temperature, pile head displacement and pile body axial force gradually decrease along the series direction due to the decrease of temperature change.