Effect of shot peening on high cycle and very high cycle fatigue properties of Ni-based superalloys

被引：38

作者：

Qin, Zhi ^{[1
]}

Li, Bin ^{[1
]}

Chen, Rui ^{[1
]}

Zhang, Han ^{[1
]}

Xue, Hongqian ^{[1
]}

Yao, Changfeng ^{[1
]}

Tan, Liang ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Key Lab High Performance Mfg Aero Engine, Minist Ind & Informat Technol, Xian 710072, Peoples R China

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2023年 / 168卷

基金：

中国国家自然科学基金;

关键词：

GH4169; superalloy; Shot peening; High cycle fatigue; Very high cycle fatigue; Residual stress; CRACK INITIATION; MICROSTRUCTURE; BEHAVIOR; IN718; MECHANISM; CORROSION; STRENGTH; GH4169;

D O I：

10.1016/j.ijfatigue.2022.107429

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this work, the GH4169 superalloy specimens were shot-peened at two different intensities (0.15 mmA and 0.3 mmA) to improve the fatigue properties, and the fatigue behavior of the shot-peen-treated specimens was investigated in the high cycle fatigue (HCF) and very high cycle fatigue (VHCF) regime. The results of the HCF and VHCF tests indicated that shot peening improved the fatigue properties of the material. In addition, it has shown that the tensile residual stresses introduced by excessive shot peening intensity reduce the benefits of shot peening in terms of improving fatigue properties.

引用

页数：13

共 35 条

[1] Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature
Cervellon, A.
Hemery, S.
Kuernsteiner, P.
Gault, B.
Kontis, P.
Cormier, J.
[J]. ACTA MATERIALIA, 2020, 188 (188) : 131 - 144
[2] Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys
Curtis, S
de los Rios, ER
Rodopoulos, CA
Levers, A
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (01) : 59 - 66
[3] Gamma double prime precipitation kinetic in Alloy 718
Devaux, A.
Naze, L.
Molins, R.
Pineau, A.
Organista, A.
Guedou, J. Y.
Uginet, J. F.
Heritier, P.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2): : 117 - 122
[4] An improvement in fatigue behavior of AISI 4340 steel by shot peening and ultrasonic nanocrystal surface modification
Karimbaev, Ruslan
Pyun, Young-Sik
Maleki, Erfan
Unal, Okan
Amanov, Auezhan
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
[5] Analytical fatigue life prediction of shot peened Inconel 718
Klotz, T.
Miao, H. Y.
Bianchetti, C.
Levesque, M.
Brochu, M.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2018, 113 : 204 - 221
[6] Surface characteristics and fatigue behavior of shot peened Inconel 718
Klotz, T.
Delbergue, D.
Bocher, P.
Levesque, M.
Brochu, M.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2018, 110 : 10 - 21
[7] Effect of surface nanostructure on tensile behavior of superalloy IN718
Kumar, Sanjeev
Rao, G. Sudhakar
Chattopadhyay, K.
Mahobia, G. S.
Srinivas, N. C. Santhi
Singh, Vakil
[J]. MATERIALS & DESIGN, 2014, 62 : 76 - 82
[8] AN ANALYSIS OF STRESS-CONCENTRATIONS CAUSED BY SHOT PEENING AND ITS APPLICATION IN PREDICTING FATIGUE-STRENGTH
LI, JK
YAO, M
WANG, D
WANG, RZ
[J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1992, 15 (12) : 1271 - 1279
[9] Effect of elevated temperature on high-cycle and very-high-cycle fatigue properties of Ni-based superalloy manufactured by selective laser melting
Li, Wei
Sun, Rui
Hu, Tianyi
Li, Xiaolong
Li, Cheng
Zhang, Yucheng
Ding, Xiaoming
Wang, Ping
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2021, 148
[10] Fatigue failure behavior and strength prediction of nickel-based superalloy for turbine blade at elevated temperature
Li, Xiaolong
Li, Wei
Lashari, Muhammad Imran
Sakai, Tatsuo
Wang, Ping
Cai, Liang
Ding, Xiaoming
Hamid, Usama
[J]. ENGINEERING FAILURE ANALYSIS, 2022, 136

← 1 2 3 4 →