Performance analysis of permanent magnet claw pole machine based on magneto-electric-thermal coupling network method

被引:2
作者
Liu, Chengcheng [1 ,2 ]
Li, Yue [1 ,2 ]
Zhang, Hongming [1 ,2 ]
Du, Handong [1 ,2 ]
机构
[1] Hebei Univ Technol, Sch Elect Engn, State Key Lab Reliabil & Intelligence Elect Equipm, Tianjin 300130, Peoples R China
[2] Prov Minist Joint Key Lab EFEAR, Tianjin 300130, Peoples R China
基金
中国国家自然科学基金;
关键词
Equivalent magnetic network; Magneto-electric-thermal coupling network; Permanent magnet claw pole machine; DESIGN; MODEL;
D O I
10.1007/s00202-023-02154-1
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The permanent magnet claw pole machine (PMCPM) with soft magnetic composite (SMC) cores has shown better performance than the traditional transverse flux machine, and its performance can be improved by developing its stator with hybrid silicon sheet and SMC cores, and this kind of PMCPM is named as HPMCPM. Due to its complex 3D magnetic structure, analyzing its performance by using the traditional finite element method (FEM) is time-consuming. To overcome this constraint, this paper proposes a magneto-electric-thermal coupling network (METCN) model with bidirectional data transmission to calculate the electromagnetic performance and temperature distribution and the calculation results are verified by the FEM method and experimental measurement results. Compared with the 3D FEM, the proposed METCN method has the advantage of fast calculation speed and similar accuracy.
引用
收藏
页码:3559 / 3572
页数:14
相关论文
共 23 条
[1]   Development of a Three-Dimensional Magnetic Equivalent Circuit Model for Axial Flux Machines [J].
Alipour-Sarabi, Ramin ;
Nasiri-Gheidari, Zahra ;
Oraee, Hashem .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (07) :5758-5767
[2]   Analysis of the Partial Demagnetization Process of Magnets in a Line Start Permanent Magnet Synchronous Motor [J].
Baranski, Mariusz ;
Szelag, Wojciech ;
Lyskawinski, Wieslaw .
ENERGIES, 2020, 13 (21)
[3]   Magneto-Electric Coupling Network Model for Reduction of PM Eddy Current Loss in Flux-Switching Permanent Magnet Machine [J].
Cao, Donghui ;
Zhao, Wenxiang ;
Liu, Tong ;
Wang, Yi .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (02) :1189-1199
[4]   A Generalized Equivalent Magnetic Network Modeling Method for Vehicular Dual-Permanent-Magnet Vernier Machines [J].
Cao, Donghui ;
Zhao, Wenxiang ;
Ji, Jinghua ;
Ding, Ling ;
Zheng, Junqiang .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2019, 34 (04) :1950-1962
[5]   Analytical Computation of the Full Load Magnetic Losses in the Soft Magnetic Composite Stator of High-Speed Slotless Permanent Magnet Machines [J].
Chebak, Ahmed ;
Viarouge, Philippe ;
Cros, Jerome .
IEEE TRANSACTIONS ON MAGNETICS, 2009, 45 (03) :952-955
[6]   Temperature Analysis of Switched Reluctance Motor Based on Equivalent Heat Circuit Method [J].
Chen, Hao ;
Wang, Kai ;
Yan, Wenju ;
Orabi, Mohamed ;
Parspour, Nejila .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2021, 31 (08)
[7]   Design and Optimization of Soft Magnetic Composite Machines With Finite Element Methods [J].
Cros, Jerome ;
Viarouge, Philippe ;
Kakhki, Mehdi Taghizadeh .
IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) :4384-4390
[8]   A Novel Mesh-Based Equivalent Magnetic Network for Performance Analysis and Optimal Design of Permanent Magnet Machines [J].
Ding, Ling ;
Liu, Guohai ;
Chen, Qian ;
Xu, Gaohong .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2019, 34 (03) :1337-1346
[9]   Core Loss Calculation for Soft Magnetic Composite Electrical Machines [J].
Guo, Youguang ;
Zhu, Jianguo ;
Lu, Haiyan ;
Lin, Zhiwei ;
Li, Yongjian .
IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) :3112-3115
[10]   MINIMIZING SKIN EFFECT IN RANDOM WOUND HIGH SPEED MACHINE STATOR [J].
Haemaelaeinen, Henry M. ;
Pyrhoenen, Juha J. ;
Puranen, Jussi .
EUROCON 2009: INTERNATIONAL IEEE CONFERENCE DEVOTED TO THE 150 ANNIVERSARY OF ALEXANDER S. POPOV, VOLS 1- 4, PROCEEDINGS, 2009, :752-+