Removal of fluorouracil from aqueous environment using magnetite graphene oxide modified with γ-cyclodextrin

Fluorouracil (FU) is a widely utilized antineoplastic medication in the pharmaceutical industry for combating gastrointestinal cancers. However, its presence in wastewater originating from pharmaceutical facilities and hospital effluents has a potential effect on DNA, and cannot be efficiently eliminated through conventional treatment methods. Consequently, the adoption of advanced technologies becomes crucial for effectively treating such wastewater. Accordingly, this study investigated the efficiency of magnetite graphene oxide nanocomposite functionalized with gamma-cyclodextrin for removing fluorouracil from aqueous solutions. The magnetite graphene oxide nanocomposite functionalized with gamma-cyclodextrin was synthesized via the hydrothermal method. Next, the effect of pH, temperature, adsorbent content, and contact time on the fluorouracil removal efficiency was explored. Ultimately, the experimental data were matched against Langmuir, Freundlich, and Temkin isotherms and Kinetic models. Accordingly, the efficiency of the absorbent used was dependent on the pH, contact time, temperature, and initial concentration of the adsorbent. The results indicated that the maximum removal efficiency for fluorouracil was achieved within the contact time of 45 min and adsorbent content of 0.020 g. In addition, the optimal pH for removing the medicine was 7. The conditions of the adsorption process followed Langmuir isotherm with correlation coefficients of 0.992 and a quasi-second kinetic model with a correlation coefficient of 0.999, with the maximum adsorption capacity of the adsorbent synthesized for the evaluated medicine estimated as 190.9 mg/g. The results showed that the magnetite graphene oxide nanocomposite functionalized with gamma-cyclodextrin could be used as an effective and available adsorbent for removing fluorouracil from pharmaceutical wastewater.