A computational and experimental mechanical study of nanocomposites for 3D printed scaffolds with a new geometry

被引：2
|
作者：
Kallivokas, S., V [1 ]
Kontaxis, L. [1 ,2 ]
Kakkos, I
Deligianni, D. [2 ]
Kostopoulos, V [2 ]
Matsopoulos, G. K. [1 ]
机构：
[1] Natl Tech Univ Athens, Sch Elect & Comp Engn, Biomed Engn Lab, Zografos 15773, Greece
[2] Univ Patras, Mech Engn Dept, Univ Campus, Rio Achaia 26504, Greece
来源：
2023 45TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE & BIOLOGY SOCIETY, EMBC | 2023年
关键词：
DESIGN;
D O I：
10.1109/EMBC40787.2023.10340382
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
We present a combined study of the mechanical properties of 3D printed scaffolds made by nanocomposite materials based on polycaprolactone (PCL). The geometry and dimensions of the three different systems is the same. The porosity is 50% for all systems. Distributions of von-Mises strains and stresses, and total deformations were obtained through Finite Element Analysis (FEA) for a maximum amount of force applied, in a compressive numerical experiment. Also compressive experiments were performed for both raw and 3D nanoconposite scaffolds.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] Experimental study on mechanical properties of 3D Printed layered rock like materials
    Hong, Zijie
    Chen, Shun
    Liu, Xufeng
    Li, Fengqiong
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [22] A study on degradation behavior of 3D printed gellan gum scaffolds
    Yu, Ilhan
    Kaonis, Samantha
    Chen, Roland
    3RD CIRP CONFERENCE ON BIOMANUFACTURING, 2017, 65 : 78 - 83
  • [23] Improving cell seeding efficiency through modification of fiber geometry in 3D printed scaffolds
    Mainardi, Valerio Luca
    Arrigoni, Chiara
    Bianchi, Elena
    Talo, Giuseppe
    Delcogliano, Marco
    Candrian, Christian
    Dubini, Gabriele
    Levi, Marinella
    Moretti, Matteo
    BIOFABRICATION, 2021, 13 (03)
  • [24] Toughening 3D printed polymers and nanocomposites
    Advincula, Rigoberto
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 256
  • [25] A Computational Geometry Generation Method for Creating 3D Printed Composites and Porous Structures
    Siegkas, Petros
    MATERIALS, 2021, 14 (10)
  • [26] Gradient 3D Printed PLA Scaffolds on Biomedical Titanium: Mechanical Evaluation and Biocompatibility
    Portan, Diana V.
    Ntoulias, Christos
    Mantzouranis, Georgios
    Fortis, Athanassios P.
    Deligianni, Despina D.
    Polyzos, Demosthenes
    Kostopoulos, Vassilis
    POLYMERS, 2021, 13 (05) : 1 - 14
  • [27] Chirality manipulation of 3D printed gyroidal scaffolds towards mechanical properties enhancement
    Zhang, Yanhong
    Zhang, Junming
    Yang, Weidong
    Che, Shunai
    Cao, Yuanyuan
    Han, Lu
    ADDITIVE MANUFACTURING, 2024, 96
  • [28] 3D printed polymeric stent design: Mechanical testing and computational modeling
    Canalejo-Codina, Francesc
    Cano-Morenilla, Mariola
    Martorell, Jordi
    Balcells, Mercedes
    Pegueroles, Marta
    Garcia-Granada, Andres A.
    MATERIALS & DESIGN, 2024, 247
  • [29] 3D printed columns with exceptional geometry
    不详
    STEEL CONSTRUCTION-DESIGN AND RESEARCH, 2022, 15 (03): : 187 - 187
  • [30] Computational Modeling of the Mechanical Behavior of 3D Hybrid Organic–Inorganic Nanocomposites
    Mohammad Maghsoudi-Ganjeh
    Liqiang Lin
    Xiaodu Wang
    Xianqiao Wang
    Xiaowei Zeng
    JOM, 2019, 71 : 3951 - 3961
12345