Slumping regime in lock-release turbidity currents

被引:6
|
作者
Gadal, Cyril [1 ]
Mercier, M. J. [1 ]
Rastello, M. [2 ]
Lacaze, L. [1 ]
机构
[1] Univ Toulouse, CNRS, Inst Mecan Fluides Toulouse IMFT, F-31400 Toulouse, France
[2] Univ Grenoble Alpes, CNRS, Grenoble INP, LEGI, F-38000 Grenoble, France
关键词
gravity currents; DRIVEN GRAVITY CURRENTS; PART; NUMERICAL-SIMULATION; HEAVY FLUID; FRONT; ENTRAINMENT; VELOCITY; SLOPES; FLOW; DYNAMICS;
D O I
10.1017/jfm.2023.762
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Most gravitational currents occur on sloping topographies, often in the presence of particles that can settle during the current propagation. Yet an exhaustive exploration of associated parameters in experimental studies is still lacking. Here, we present an extensive experimental investigation of the slumping regime of turbidity (particle-laden) currents in two lock-release (dam-break) systems with inclined bottoms. We identify three regimes controlled by the ratio between settling and current inertia. (i) For negligible settling, the turbidity current morphodynamics corresponds to that of saline homogeneous gravity currents, in terms of velocity, slumping (constant-velocity) regime duration and current morphology. (ii) For intermediate settling, the slumping regime duration decreases to become fully controlled by a particle settling characteristic time. (iii) When settling overcomes the current initial inertia, the slumping (constant-velocity) regime is no longer detected. In the first two regimes, the current velocity increases with the bottom slope, of approximately 35% between 0. and 15.. Finally, our experiments show that the current propagates during the slumping regime with the same shape in the frame of the moving front. Strikingly, the current head is found to be independent of all experimental parameters covered in the present study. We also quantify water entrainment coefficients E and compare them with previous literature, hence finding that E increases rather linearly with the current Reynolds number.
引用
收藏
页数:24
相关论文
共 50 条
  • [31] Soft Switch Lock-Release Mechanism for a Switch-Mode Hydraulic Pump Circuit
    Van de Ven, James D.
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2014, 136 (03):
  • [32] The propagation of particulate gravity currents in a V-shaped triangular cross section channel: Lock-release experiments and shallow-water numerical simulations
    Meriaux, C. A.
    Zemach, T.
    Kurz-Besson, C. B.
    Ungarish, M.
    PHYSICS OF FLUIDS, 2016, 28 (03)
  • [33] Vertical structure of continuous release saline and turbidity currents
    Islam, M. Ashraful
    Imran, Jasim
    JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS, 2010, 115
  • [34] Towards inverse modeling of turbidity currents: The inverse lock-exchange problem
    Lesshafft, Lutz
    Meiburg, Eckart
    Kneller, Ben
    Marsden, Alison
    COMPUTERS & GEOSCIENCES, 2011, 37 (04) : 521 - 529
  • [35] Direct numerical simulation of lock-exchange density currents over the rough wall in slumping phase
    Bhaganagar, Kiran
    JOURNAL OF HYDRAULIC RESEARCH, 2014, 52 (03) : 386 - 398
  • [36] The Importance of Coaxial and Non-coaxial Components of Shear Strength of Sediments in Submarine Slumping and Initiation of Turbidity Currents
    Rajaraman, J.
    Rao, S. Narasimha
    4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND DEVELOPMENT- ICESD 2013, 2013, 5 : 88 - 95
  • [37] Role of head of turbulent 3-D density currents in mixing during slumping regime
    Bhaganagar, Kiran
    PHYSICS OF FLUIDS, 2017, 29 (02)
  • [38] TURBIDITY CURRENTS
    GRAF, WH
    ALTINAKAR, MS
    HOUILLE BLANCHE-REVUE INTERNATIONALE DE L EAU, 1995, 50 (07): : 28 - 37
  • [39] TURBIDITY CURRENTS
    CHARNOCK, H
    NATURE, 1959, 183 (4662) : 657 - 659
  • [40] Bedform Regime Diagram for Rivers and Turbidity Currents: Conditions for the Formation and Obliteration of Dunes
    Parker, Gary
    Fu, Xudong
    Zhang, Yuanfeng
    Zinger, Jessica
    Konsoer, Kory
    PROCEEDINGS OF THE 35TH IAHR WORLD CONGRESS, VOLS III AND IV, 2013, : 10390 - 10397