A Review of Fluid-Induced Excitations in Centrifugal Pumps

被引:7
作者
Wu, Chengshuo [1 ,2 ]
Yang, Jun [3 ]
Yang, Shuai [1 ]
Wu, Peng [1 ,2 ]
Huang, Bin [4 ]
Wu, Dazhuan [1 ,2 ]
机构
[1] Zhejiang Univ, Coll Energy Engn, Hangzhou 310027, Peoples R China
[2] Zhejiang Key Lab Clean Energy & Carbon Neutral, Jiaxing 314000, Peoples R China
[3] Ning Bo Fotile Kitchenware Co, Ltd, Ningbo 315300, Peoples R China
[4] Zhejiang Univ, Ocean Coll, Zhoushan 316021, Peoples R China
基金
中国国家自然科学基金;
关键词
centrifugal pump; vibration; fluid-induced excitation; unsteady flow; pressure pulsation; PRESSURE-FLUCTUATIONS DOWNSTREAM; ROTOR-STATOR INTERACTION; OFF-DESIGN CONDITIONS; RADIAL-FLOW PASSAGE; QUANTITATIVE VISUALIZATION; PERFORMANCE-CHARACTERISTICS; NUMERICAL-SIMULATION; DISCHARGE FLOW; TIP CLEARANCE; UNSTEADY-FLOW;
D O I
10.3390/math11041026
中图分类号
O1 [数学];
学科分类号
0701 ; 070101 ;
摘要
This paper describes the related research work in the field of fluid-induced vibration of centrifugal pumps conducted by many researchers. In recent years, all walks of life have put forward higher demands for the vibration performance of pumps which drives the investigation on the root cause of pump vibration and the development of guidelines for the design of low-vibration pumps. Fluid-induced excitation is the most important and significant source of pump vibration. Understanding its generation mechanism and dominant characteristics is important for developing low-vibration pump design methodology. This paper starts with the analysis of unsteady flow in the centrifugal pump and summarizes unsteady flow characteristics such as jet-wake structure, secondary flow, and rotational stall in the operating pump. Based on the understanding of the unsteady flow structure in the pump, the fluid-induced excitation mechanism and its characteristics based on the investigation of unsteady pressure pulsation and excitation forces in the pump are summarized. For the pump operating at nominal flow rate, the excitation at blade passing frequency (BPF) dominates and related suppression methods are classified and summarized to provide reference for the design of a low-vibration pump.
引用
收藏
页数:20
相关论文
共 105 条
  • [1] ADLER D, 1979, J MECH ENG SCI, V21, P1, DOI 10.1243/JMES_JOUR_1979_021_003_02
  • [2] FLOW STRUCTURE IN A RADIAL FLOW PUMPING SYSTEM USING HIGH-IMAGE-DENSITY PARTICLE IMAGE VELOCIMETRY
    AKIN, O
    ROCKWELL, D
    [J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 1994, 116 (03): : 538 - 544
  • [3] Exploring the Effect of V-Shaped Cut at Blade Exit of a Double Volute Centrifugal Pump
    Al-Qutub, Amro M.
    Khalifa, Atia E.
    Al-Sulaiman, Faleh A.
    [J]. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (02):
  • [4] [Anonymous], 2016, 2081612016 ISO
  • [5] [Anonymous], 2012, 29542012 ISO
  • [6] [Anonymous], 2009, 1081672009 ISO
  • [7] [Anonymous], 2022, Mechanical VibrationMeasurement and Evaluation of Machine Vibration, Part 3: Industrial Machinery with a Power Rating Above 15 kW and Operating Speeds Between 120 r/min and 30,000 r/min
  • [8] EXPERIMENTAL INVESTIGATION OF ROTOR-STATOR INTERACTION IN A CENTRIFUGAL PUMP WITH SEVERAL VANED DIFFUSERS
    ARNDT, N
    ACOSTA, AJ
    BRENNEN, CE
    CAUGHEY, TK
    [J]. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1990, 112 (01): : 98 - 108
  • [9] Arndt N., 1989, J TURBOMACH, V111, P213, DOI [10.1115/1.3262258, DOI 10.1115/1.3262258]
  • [10] Ash J.E., 1956, ASME PAP, V56-A-205