Tungsten Oxide Thin Films for Electrochromic Applications: Pulse Width-Controlled Deposition by High-Power Impulse Magnetron Sputtering

被引:3
|
作者
Najafi-Ashtiani, Hamed [1 ,2 ]
Bilek, Marcela M. [1 ,3 ,4 ,5 ]
Akhavan, Behnam [1 ,3 ,4 ,6 ,7 ]
机构
[1] Univ Sydney, Sch Phys, Sydney, NSW 2006, Australia
[2] Velayat Univ, Fac Basic Sci, Dept Phys, Iranshahr, Iran
[3] Univ Sydney, Sch Biomed Engn, Sydney, NSW 2006, Australia
[4] Univ Sydney, Nano Inst, Sydney, NSW 2006, Australia
[5] Univ Sydney, Charles Perkins Ctr, Sydney, NSW 2006, Australia
[6] Univ Newcastle, Sch Engn, Callaghan, NSW 2308, Australia
[7] Hunter Med Res Inst HMRI, Precis Med Program, New Lambton Hts, NSW 2305, Australia
基金
澳大利亚研究理事会;
关键词
coatings; electrochromics; high-power impulse magnetron sputtering; pulse lengths; tungsten; WO3; ELECTRICAL-PROPERTIES; WO3; FILMS; BAND-GAP; COATINGS; HIPIMS; PERFORMANCE; NANOCOMPOSITE; COLORATION; STABILITY; EVOLUTION;
D O I
10.1002/adem.202301378
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Tungsten oxide (WO3) thin films have been of prime interest among electrochromic materials because of their chemical stability, strong adherence to various substrates, and high coloration efficiency. High-power impulse magnetron sputtering (HiPIMS) holds great potential in fabricating durable WO3-based electrochromic layers. However, the tungsten target-plasma interactions in reactive-HiPIMS deposition of WO3 and their role in modulating the electrochromic function of the resulting WO3 coatings are yet to be understood. Herein, by controlling the HiPIMS pulse length, the stoichiometry of tungsten oxide structures can be tuned to optimize the transparency and electrochromic function of the coatings. X-ray photoelectron spectroscopy data shows that at pulse lengths shorter than 85 mu s, the concentration of suboxide compounds is less than that of tungsten trioxide, while for pulse lengths longer than 100 mu s, this balance is reversed. The average optical transparency of the coatings in the range of visible light is higher than 80%. The optical transmittance modulation (Delta T) of 38.1, 36.2, and 34.3% and coloration efficiency of 41.3, 38.4, and 35.9 cm2 C-1 are measured for the WOx samples deposited at pulse lengths of 70, 85, and 100 mu s, respectively. Tuning the HiPIMS pulse characteristics is a simple strategy to deposit tungsten oxide films with tuned electrochromic properties for an array of applications, from smart windows to wearable displays. This article reports the fabrication of tungsten oxide electrochromic coatings using reactive high-power impulse magnetron sputtering (HiPIMS). Results demonstrate the tunability of tungsten oxide structures via HiPIMS pulse length, optimizing coating transparency and electrochromic properties. Tuning HiPIMS pulse characteristics offers a straightforward approach to deposit tailored tungsten oxide films for diverse engineering applications, including smart windows and wearable displays.image (c) 2024 WILEY-VCH GmbH
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Reactive sputtering of δ-ZrH2 thin films by high power impulse magnetron sputtering and direct current magnetron sputtering
    Hogberg, Hans
    Tengdelius, Lina
    Samuelsson, Mattias
    Eriksson, Fredrik
    Broitman, Esteban
    Lu, Jun
    Jensen, Jens
    Hultman, Lars
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2014, 32 (04):
  • [42] Tailoring residual stresses in CrNx films on alumina and silicon deposited by high-power impulse magnetron sputtering
    Elo, Robin
    Jacobson, Staffan
    Kubart, Tomas
    SURFACE & COATINGS TECHNOLOGY, 2020, 397
  • [43] Comparison of CrN Coatings Prepared Using High-Power Impulse Magnetron Sputtering and Direct Current Magnetron Sputtering
    Bai, Heda
    Li, Jin
    Gao, Jialai
    Ni, Jinyang
    Bai, Yaxiong
    Jian, Jie
    Zhao, Lin
    Bai, Bowen
    Cai, Zeyun
    He, Jianchao
    Chen, Hongsheng
    Leng, Xuesong
    Liu, Xiangli
    MATERIALS, 2023, 16 (18)
  • [44] Arc energy minimization in high-power impulse magnetron sputtering
    Oskirko, V. O.
    Semenov, V. D.
    Solovyev, A. A.
    Rabotkin, S., V
    Pavlov, A. P.
    Zakharov, A. N.
    VACUUM, 2022, 202
  • [45] Structural and optical properties of zirconia thin films deposited by reactive high-power impulse magnetron sputtering
    Zhao, Xiaoli
    Jin, Jie
    Cheng, Jui-Ching
    Lee, Jyh-Wei
    Wu, Kuo-Hong
    Lin, Kuo-Cheng
    Tsai, Jung-Ruey
    Liu, Kou-Chen
    THIN SOLID FILMS, 2014, 570 : 404 - 411
  • [46] Oxidation behaviour of TiSiN(Ag) films deposited by high power impulse magnetron sputtering
    Cavaleiro, D.
    Cavaleiro, A.
    Carvalho, S.
    Fernandes, F.
    THIN SOLID FILMS, 2019, 688
  • [47] Vanadium and vanadium nitride thin films grown by high power impulse magnetron sputtering
    Hajihoseini, H.
    Gudmundsson, J. T.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2017, 50 (50)
  • [48] Bipolar high-power impulse magnetron sputtering synthesis of high-entropy carbides
    Hossain, Mohammad Delower
    Borman, Trent
    Mcllwaine, Nathaniel Seymour
    Maria, Jon-Paul
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2022, 105 (06) : 3862 - 3873
  • [49] Effects of duty cycle and pulse frequency on the fabrication of AlCrN thin films deposited by high power impulse magnetron sputtering
    Hsiao, Yu-Chiao
    Lee, Jyh-Wei
    Yang, Yung-Chin
    Lou, Bih-Show
    THIN SOLID FILMS, 2013, 549 : 281 - 291
  • [50] Microstructure and Platelet Adhesion Behavior of Titanium Oxide Films Synthesized by Reactive High-Power Pulse Magnetron Sputtering
    Yin, Tai-Lei
    Jing, Feng-Juan
    Sun, Hong
    Leng, Yongxiang
    Yukimura, Ken
    Huang, Nan
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2013, 41 (08) : 1837 - 1843