Dynamic behavior of single curved fiber-metal hybrid lamina composite shells under blast loading-experimental observations

被引:14
|
作者
Li, Xin [1 ]
Hao, Xin [2 ]
Li, Shiqiang [3 ]
Jin, Tao [3 ]
Gao, Guangfa [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China
[2] Taiyuan Univ Sci & Technol, Coll Appl Sci, Taiyuan 030024, Peoples R China
[3] Taiyuan Univ Technol, Inst Appl Mech & Biomed Engn, Taiyuan 030024, Peoples R China
基金
中国国家自然科学基金;
关键词
Hybrid composites; Impact behavior; Deformation; Resin transfer moulding (RTM); Fiber-metal hybrid lamina composite; LOW-VELOCITY IMPACT; SURFACE TREATMENTS; PART I; RESISTANCE; CURVATURE; FAILURE; PANELS; BEAMS;
D O I
10.1016/j.compscitech.2023.109930
中图分类号
TB33 [复合材料];
学科分类号
摘要
In the current study, the dynamic response of single curved fiber-metal hybrid lamina composite (FM-HLC) shells under blast loading was experimentally investigated. The influence of explosive mass and distance, the weave pattern of fiber-metal hybrid lamina, and the radius of curvature was analyzed. The experimental results show that the deformation modes of curved FM-HLC shells under blast are similar to that of metal shells when failure is absent. After failure happens, severe delamination only occurs at the site of damage region rather than extending to other area. This strongly demonstrates that FM-HLC shells have better anti-delamination performance than traditional FMLs when subject to blast loads. For different weave patterns, the global deformation of FM-HLCs decreases with the increase of longitudinal reinforcement level. When the radius of curvature increases from 250 mm to infinity (flat panel), the permanent deflection of the structure gradually increases. Meanwhile, the "counter-intuitive behavior " and "local reverse snap buckling " are observed in the experiments. This work not only provides a strategy for blast resistance design of FM-HLCs, but also offers a good reference for understanding the response of orthotropic panels/shells under blast impact.
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Experimental research on mechanical behavior of composite beams with precast slabs and hybrid fiber ECC under negative momen
    Fan, Jiansheng
    Liu, Rurui
    Zhang, Jun
    Yang, Song
    Ai, Zubin
    Chen, Fan
    Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2021, 54 (04): : 57 - 67
  • [32] Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite
    丁向东
    连建设
    江中浩
    孙军
    Transactions of Nonferrous Metals Society of China, 2001, (04) : 503 - 508
  • [33] Effect of thermal residual stresses on yielding behavior under tensile or compressive loading of short fiber reinforced metal matrix composite
    Ding, XD
    Lian, JS
    Jiang, ZH
    Sun, J
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2001, 11 (04) : 503 - 508
  • [34] Mechanical behavior of hybrid glass-flax-carbon fiber-reinforced polymer composites under static and dynamic loading
    Mabrouk, Osama M.
    Khair-Eldeen, Wael
    Hassanin, Ahmed H.
    Hassan, Mohsen A.
    POLYMER COMPOSITES, 2024, 45 (17) : 16228 - 16243
  • [35] Fiber Bridging Induced Toughening Effects on the Delamination Behavior of Composite Stiffened Panels under Bending Loading: A Numerical/Experimental Study
    Russo, Angela
    Zarrelli, Mauro
    Sellitto, Andrea
    Riccio, Aniello
    MATERIALS, 2019, 12 (15)
  • [36] Experimental and Constitutive Model Study on Dynamic Mechanical Behavior of Metal Rubber under High-Speed Impact Loading
    Zou, Youchun
    Xiong, Chao
    Yin, Junhui
    Cui, Kaibo
    Zhu, Xiujie
    Deng, Huiyong
    Song, Shijun
    SHOCK AND VIBRATION, 2021, 2021
  • [37] Fracture behavior of Ti/Al3Ti metal-intermetallic laminate (MIL) composite under dynamic loading
    Cao, Yang
    Guo, Chunhuan
    Zhu, Shifan
    Wei, Ningxia
    Javed, Raja Ahsan
    Jiang, Fengchun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 637 : 235 - 242
  • [38] A novel predictive model for mechanical behavior of single-lap GFRP composite bolted joint under static and dynamic loading
    Wang, Panding
    He, Rujie
    Chen, Haosen
    Zhu, Xiaolei
    Zhao, Qilin
    Fang, Daining
    COMPOSITES PART B-ENGINEERING, 2015, 79 : 322 - 330
  • [39] Behavior of hybrid bonded/bolted GFRP single-lap joint under static tensile loading: An experimental and numerical study
    Xiang, Sheng
    Cheng, Bin
    Wang, Jinxiao
    Li, Derui
    Yan, Xingfei
    JOURNAL OF COMPOSITE MATERIALS, 2025, 59 (05) : 589 - 602
  • [40] Effect of Kevlar and Carbon Fiber Face Sheet on the Deformation Behavior of Aluminum Hybrid Composite Foam Core Sandwich Panel under Flexural Loading
    Raj, Rakesh
    Pandey, Ashutosh
    Gupta, Gaurav
    Sriram, S.
    Prasanth, N.
    Chilla, Venkat
    Mondal, D. P.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,