Epoxy-Date Palm Fiber Composites: Study on Manufacturing and Properties

Epoxy-date palm fiber (DPF) composites have been synthesized and characterized successfully with various reinforced ratios of DPF (i.e., 5, 10, 15, and 20 wt%), where the mixture of Epoxy-DPF is poured into different prepared silicone molds. The first type of silicon molds is prepared to produce the samples of the Epoxy-DPF composites to conduct mechanical tests (i.e., impact, creep, and tensile). When the ratio of DPF is increased in the Epoxy matrix, a significant improvement was observed in the results of the mechanical tests. The Epoxy-DPF composites with 15 wt% exhibit a high hardness of 38.4 in comparison with other composite specimens. Maximum impact strength, creep strain, and tensile strengths were recorded to be 0.13 J/mm(2), 0.03112, and 23.4 N/mm(2), respectively, using 20 wt% DPF.