Advances in Diffusion Barrier Coatings for High-Temperature Applications

Diffusion barrier coating (DBC) systems on heat resistant alloys consist of a multi-layer structure: an outer Al-reservoir layer and an inner diffusion barrier layer (DBL). The outer Al-reservoir layer forms a protective Al2O3 scale and DBL acts as a barrier layer against alloy interdiffusion. Three kinds of DBL were developed: Re on Ni-based superalloys; W on stainless steels; and Cr on Ni-Cr alloys. It was found that DBC systems have excellent mechanical properties (creep and fatigue), improving alloy substrate performance, and enhance the anti-exfoliation properties of YSZ in thermal barrier coatings (TBC) in addition to providing excellent oxidation resistance. At temperatures higher than 1300 degrees C, however, the DBC design based on kinetics (diffusion) is insufficient to form and maintain a protective Al2O3 scale. In this case a self-maintaining coating (SMC) system designed on the basis of thermodynamics (phase stability) is required. The SMC system formed on Nb-Hf (C-103) alloy consists of a multi-layer structure: an outer Re (Al, Si)1.8 and inner NbSi2 layers, plus a transient Nb5Si3 layers formed during oxidation. At temperatures higher than 1300 degrees C the Al2O3 can be formed by changing the Al/Si ratio in the Re (Al, Si)1.8 in which Si was supplied from the decomposition reaction of NbSi2 to Si + Nb5Si3 during selective oxidation of Al. It is proposed that coating alloys should be designed for considering not only high temperature oxidation, but also alloy substrate mechanical properties and anti-exfoliation of oxide scales, based on both kinetic principles (DBC system) and thermodynamics (SMC system).