Performance enhancement of a novel serpentine channel cooled plate used for cooling of Li-ion battery module

被引:38
作者
Jaffal, Hayder Mohammad [1 ]
Mahmoud, Nabeel Sameer [2 ]
Imran, Ahmed Abdulnabi [2 ]
Hasan, Ala [3 ]
机构
[1] Mustansiriyah Univ, Coll Engn, Mech Engn Dept, Baghdad, Iraq
[2] Univ Technol Baghdad, Mech Engn Dept, Baghdad, Iraq
[3] VTT Tech Res Ctr Finland Ltd, POB 1000, FI-02044 Espoo, Finland
关键词
Performance enhancement; Cooled plate; Li-ion battery; Liquid-cooling; Serpentine ribbed channel; Rib orientation; THERMAL MANAGEMENT-SYSTEM; HEAT-TRANSFER; OPTIMIZATION; SINK; DESIGN; FLOW;
D O I
10.1016/j.ijthermalsci.2022.107955
中图分类号
O414.1 [热力学];
学科分类号
摘要
One of the most significant challenges of battery thermal management system is manifested in maintaining optimal battery performance by keeping the overall battery temperature within a narrow temperature range. The present work aimed to study a novel design of ribbed serpentine channel cooled plate (SCCP) as an effective cooling module of Li-ion battery. The study included a numerical simulation of the effect of the rib orientation (90 degrees, 75 degrees, 60 degrees, and 45 degrees) and the rib shape (semi-circular, trapezoidal, and triangular) on the hydrothermal performance of SCCP. The study was conducted under laminar flow conditions for a Reynolds number range (200-1000) and battery cell discharge rate range (1C-2C). The numerical simulation results were validated against experimental measurements of the performance of a SCCP with semi-circular ribs that rotated by 90 degrees. The validation showed a good agreement with a maximum deviation of 8% and 11% for the Nusselt number and the friction factor, respectively. The results of the study indicated that the ribs play a vital role in improving the heat transfer. It is found that the rib orientation was more effective than the rib shape in enhancing the hydrothermal performance improvement factor. In addition, the triangular rib with 45 degrees orientation showed highest performance improvement factor compared with the other SCCP designs with a value of 1.3.
引用
收藏
页数:13
相关论文
共 50 条
[1]   Performance of serpentine channel based Li-ion battery thermal management system: An experimental investigation [J].
Ibrahim, Amier ;
Guo, Jian ;
Wang, Yiwei ;
Zheng, Yaodong ;
Lei, Bo ;
Jiang, Fangming .
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2020, 44 (13) :10023-10043
[2]   Effect of Secondary Channel Structure Based on Serpentine Microchannel Liquid Cooling Plate on Cooling Performance of Lithium-Ion Battery [J].
Jin, Zunlong ;
Shen, Haobo ;
Ding, Lekang ;
Wang, Shaoqi ;
Ren, Yahao ;
Wang, Changliang .
ENERGY TECHNOLOGY, 2025,
[3]   Numerical investigation of cooling performance of a novel air-cooled thermal management system for cylindrical Li-ion battery module [J].
Kausthubharam ;
Koorata, Poornesh K. ;
Chandrasekaran, Neelakandan .
APPLIED THERMAL ENGINEERING, 2021, 193
[4]   Investigation on thermal performance of water-cooled Li-ion cell and module with tree-shaped channel cold plate [J].
Ran, Yan ;
Su, Yuefeng ;
Chen, Lai ;
Yan, Kang ;
Yang, Chenxing ;
Zhao, Yong .
JOURNAL OF ENERGY STORAGE, 2022, 50
[5]   Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate [J].
Deng, Tao ;
Zhang, Guodong ;
Ran, Yan .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 125 :143-152
[6]   Experimental and Theoretical Analysis of Immersion Cooling of a Li-Ion Battery Module [J].
Salvi, Swapnil S. ;
Surampudi, Bapiraju ;
Swarts, Andre ;
Sarlashkar, Jayant ;
Smith, Ian ;
Alger, Terry ;
Jain, Ankur .
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE, 2024, 21 (04)
[7]   Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate [J].
Li, Yubai ;
Zhou, Zhifu ;
Wu, Wei-Tao .
APPLIED THERMAL ENGINEERING, 2019, 147 :829-840
[8]   Multi-objective optimization of cooling plate with hexagonal channel design for thermal management of Li-ion battery module [J].
Monika, Kokkula ;
Punnoose, Emma Mariam ;
Datta, Santanu Prasad .
APPLIED ENERGY, 2024, 368
[9]   A double serpentine channel liquid cooling plate for hotspot targeted cooling of lithium-ion batteries in a battery module [J].
Yogeshwar, Dasari ;
Repaka, Ramjee ;
Marath, Navaneeth K. .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 209
[10]   Investigate the effect of a novel inlet header on the thermal and hydraulic performance of a liquid cold plate used for cooling the Li-ion battery cell of electric vehicles [J].
Al Shdaifat, Mohammad Yacoub ;
Zulkifli, Rozli ;
Sopian, Kamaruzzaman ;
Salih, Abeer Adel .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2023, 237 (14) :3326-3333