Enhancing the physical properties of recycled low-density polyethylene and virgin low-density polyethylene blend using octanoate starch

被引:1
|
作者
Al Maamori, Mohammed Hamza [1 ]
Habeeb, Salih Abbas [2 ,3 ]
Moslem, Mohammed Ali [2 ]
机构
[1] Al Mustaqbal Univ, Coll Engn & Technol, Biomed Engn Dept, Babil, Iraq
[2] Babylon Univ, Dept Polymer & Petrochem Ind, Babylon, Iraq
[3] Babylon Univ, Dept Polymer & Petrochem Ind, Najaf St, Babylon 51001, Iraq
关键词
Recycled low-density polyethylene; recycled low-density polyethylene: virgin low-density polyethylene: octanoate starch blend; tensile strength; hardness; thermal behavior; RUBBER; WASTE; PERFORMANCE; BEHAVIOR; FILMS;
D O I
10.1177/14777606241239065
中图分类号
TB33 [复合材料];
学科分类号
摘要
Increasing global consumption of low-density polyethylene leads to more polymeric waste and challenges solid waste management. Therefore, the process of recycling or mixing recycled low-density polyethylene (RLDPE) with the same virgin low-density polyethylene (VLDPE) and enhancing the properties of this blend by adding different amounts of bioplastic such as Octanoate starch (OCST) is a good contribution to getting rid of plastic waste and obtaining new materials. This paper mixed the 20, 30 and 50 wt.% from RLDPE with VLDPE to determine the homogeneous blend. Also, 30, 40, and 50 wt. % from OCST were blended with homogeneous as a 20:80 RLDPE: VLDPE to obtain a new hybrid blend containing bioplastic. The scanning electron microscope (SEM) results showed the high surface roughness of the film RLDPE: VLDPE after adding the OCST. The tensile strength, elastic modulus, and hardness of the 20:80 RLDPE: VLDPE blend were 13.0 +/- 1.467 MPa, 0.08 +/- 0.016 MPa, and 42.3 +/- 2.32 Shore A, while the tensile strength, elastic modulus, and hardness of the 12:48:40 RLDPE: VLDPE: OCST were 14.3 +/- 1.626 MPa, 0.1 +/- 0.032 MPa, and 50.1 +/- 2.78 Shore A respectively. On the other hand, the Fourier-Transform Infrared (FTIR) indicated that the strong bands at 1746 cm-1, 2856 cm-1, and 2927 cm-1 indicated stretching deformation of the ester carbonyl group and the methyl and methylene groups of OCST with blend polymers, respectively. The thermal properties as melting point, heat energy consumption, and heat flow difference increased from 122.52 to 123.73 degrees C, -389.41 to -144.43 (mJ), and -77.88 to -28.89 (J/g) when the OCST content increased from 20:80 RLDPE: VLDPE to 12:48:40 RLDPE: VLDPE: OCST. Thermal decomposition led to the formation of functional groups such as hydroxyl and carbonyl on LDPE baskets and an increase in the carbonyl index after adding OCST to the RLDPE: VLDPE blend. The best hybrid blend was 12:48:40 RLDPE: VLDPE: OCST.
引用
收藏
页码:445 / 457
页数:13
相关论文
共 50 条