Evaluation of the Stress-Strain State at the Crack Tip in Casing Pipes Based on Numerical Simulation

被引：4
作者：
Zvirko, O. I. [1 ]
Lipec, S. [2 ]
Vengreniuk, O. I. [1 ]
Dzioba, I. [2 ]
机构：
[1] Natl Acad Sci Ukraine, Karpenko Physicomech Inst, Lvov, Ukraine
[2] Technol Univ, Kielce, Poland
来源：
MATERIALS SCIENCE | 2023年 / 58卷 / 04期
关键词：
casing; microstructure of steels; simulation of crack growth resistance; fracture mechanism; fracture toughness; FRACTURE; CORROSION; OIL;
D O I：
10.1007/s11003-023-00685-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The distribution of local stresses and strains in a specimen in the vicinity of the crack tip in 50G and 32G2 casing pipe steels with different microstructure is obtained by simulating the stress-strain state at the crack tip and using numerical calculations. Steels are distinguished by atypical mechanical behavior: lower-strength 50G steel with a coarse-grained ferrite-pearlite structure is characterized by lower resistance to brittle fracture compared to 32G2 steel with a fine-grained bainite structure. The finite element method is used to simulate the specimen with a crack, and for calculations the true stress-strain curves of the steels are used. The calculation results confirm a higher susceptibility of the coarsegrained steel to crack propagation by brittle fracture.
引用
收藏
页码：460 / 465
页数：6
相关论文
共 50 条
  • [41] Numerical Study of the Influence of Discharge Wells on the Stress-Strain Evolution in Coal Seam
    Evtushenko, E.
    Smolin, I.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019, 2019, 2167
  • [42] Stress-strain state and thermal state of rubber-cord casings of highly elastic couplings
    Tribel'skii I.A.
    Zubarev A.V.
    Russian Engineering Research, 2008, 28 (12) : 1159 - 1164
  • [43] Numerical Study on the Determination of Crack Initiation Angle, Stress Field and Stress Triaxiality at Crack Tip in a Cracked Beam of Functionally Graded Material
    Ganguwar, S.
    Nistane, V. M.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2024, : 2847 - 2862
  • [44] Finite strain analysis of crack tip fields in incompressible hyperelastic solids loaded in plane stress
    Long, Rong
    Krishnan, Venkat R.
    Hui, Chung-Yuen
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2011, 59 (03) : 672 - 695
  • [45] Effects of short cracks produced at blunted pre-crack tip on stress and strain distributions
    S. R. Yu
    R. Cao
    Z. G. Yan
    J. H. Chen
    International Journal of Fracture, 2005, 132 : 33 - 48
  • [46] A Hierarchial Modeling of Stress-Strain State of Multiphase Material Subjected to Uniaxial Loading
    Smirnov, S. V.
    Konovalov, A. V.
    Myasnikova, M. V.
    Khalevitsky, Yu. V.
    Smirnov, A. S.
    Igumnov, A. S.
    MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2016), 2016, 1785
  • [47] Mesomechanical Numerical Modeling of the Stress-Strain Localization and Fracture in an Aluminum Alloy with a Composite Coating
    Balokhonov, Ruslan R.
    Schwab, Eugen A.
    Romanova, Varvara A.
    Zinoviev, Aleksandr V.
    Martynov, Sergey A.
    INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014, 2014, 1623 : 47 - 50
  • [48] Effects of short cracks produced at blunted pre-crack tip on stress and strain distributions
    Yu, SR
    Cao, R
    Yan, ZG
    Chen, JH
    INTERNATIONAL JOURNAL OF FRACTURE, 2005, 132 (01) : 33 - 48
  • [49] Numerical simulation for quasi-static crack growth and dynamic crack branching by coupled state-based PD and XFEM
    Chen, Bing
    Yu, Tiantang
    Natarajan, Sundararajan
    Zhang, Qing
    Bui, Tinh Quoc
    ACTA MECHANICA, 2023, 234 (08) : 3605 - 3622
  • [50] Evaluation of the stress-strain properties in the thickness direction - particularly for thin and strong papers
    Andersson, Christian
    Fellers, Christer
    NORDIC PULP & PAPER RESEARCH JOURNAL, 2012, 27 (02) : 287 - 294
12345