Seismic design of reinforced concrete buildings equipped with viscous dampers using simplified performance-based approach

Passive control systems, such as Fluid Viscous Dampers (FVDs), have gained significant consideration in the design of earthquake-resistant structures. However, simple analysis and design methods are scarce for more practical and feasible implementation. This study provides a simplified procedure for performance-based seismic design of Reinforced Concrete (RC) special moment resisting frame using nonlinear FVDs. It adopts an extended performance-based design approach, focusing on maximum displacement along with floor acceleration to control the overall behavior of the structure. The fundamental principle of the method is to achieve the fully stressed (effect of FVDs on response indices) design approach to place dampers, which is attained by placing dampers among the storeys where drifts exceed the pre-decided performance limits. Further, a uniform damage distribution concept is followed to maximize the dampers' capacity. This study examines a rectangular-shaped RC SMRF with dampers to get the required performance when subjected to design basis and maximum considered earthquake levels. To check the efficacy, the proposed method is contrasted with a practical design method and a standard placement method employed in previous studies for RC structures with dampers. The analysis shows that the structure meets the performance targets of the design basis and the maximum considered level of earthquake hazards using the proposed step-by-step procedure. The comparison with the other two methods confirmed that the structure with dampers improved seismic behavior with the suggested process. Structural engineers can refer to the proposed method for the design of RC buildings with FVDs.