Improved tensile properties of Al2O3/Al composite with in-situ generated Al2O3

被引：2
|
作者：
Shi, Wenchao [1 ]
Cui, Beishun [1 ]
Tang, Min [1 ]
Gong, Dongmei [2 ]
Xu, Feng [2 ]
机构：
[1] Hefei Univ Technol, Hefei 230009, Peoples R China
[2] West Anhui Univ, Liuan 237012, Anhui, Peoples R China
来源：
MATERIALS TESTING | 2024年 / 66卷 / 03期
基金：
安徽省自然科学基金;
关键词：
aluminum matrix composite; in situ; tensile property; reinforcement; ball milling;
D O I：
10.1515/mt-2023-0311
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In order to obtain a Al2O3/Al composite with high strength, the Al2O3 generated in situ is served as reinforcement. The ball milling is used to flake pure Al powders. The Al2O3/Al composite with flaked Al powders is obtained by vacuum hot pressing sintering. The effect of the flaked Al powders on the distribution of Al2O3 generated in situ is studied. The hardness and tensile properties of Al2O3/Al composite are studied. The results show that the dehydration temperatures of boric acid in powder mixtures with the flaked Al powders and with the spherical Al powders are 119 degrees C and 128 degrees C, respectively. During sintering stage, the Al2O3 is generated in situ. Compared with the Al2O3/Al composites with the spherical Al powders, more Al2O3 are generated in Al2O3/Al composites with the flaked Al powders. The hardness and ultimate tensile strength of Al2O3/Al composite are higher than those of pure Al alloy.
引用
收藏
页码：359 / 363
页数：5
相关论文
共 50 条
  • [41] Microstructure, billet surface quality and tensile property of (Al2O3 + Al3Zr)p/Al composites in situ synthesized with electromagnetic field
    Wang, Hongming
    Li, Guirong
    Zhao, Yutao
    Zhang, Zhao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (18) : 5696 - 5700
  • [42] Al2O3 reinforced MoAlB ceramic with improved oxidation resistance
    Yang, Xiao-Hui
    Zhang, Guo-Hua
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2025, 45 (06)
  • [43] Development and characterization of Al/MWCNT–Al2O3 hybrid composite by accumulative roll bonding
    Mohamad Reza Nasresfahani
    Morteza Shamanian
    Journal of Materials Science, 2018, 53 : 10812 - 10821
  • [44] An Al matrix composite reinforced with carbon nanotubes, Al3BC, and γ-Al2O3: Investigation of mechanical, thermal, and wear resistance properties
    Hu, Jingyi
    Gao, Tong
    Liu, Guiliang
    Liu, Jingbin
    Xu, Wenhua
    Liu, Xiangfa
    MATERIALS CHARACTERIZATION, 2025, 222
  • [45] Micromechanical strength of individual Al2O3 platelets
    Feilden, Ezra
    Giovannini, Tommaso
    Ni, Na
    Ferraro, Claudio
    Saiz, Eduardo
    Vandeperre, Luc
    Giuliani, Finn
    SCRIPTA MATERIALIA, 2017, 131 : 55 - 58
  • [46] Coating of Y2O3 additive on Al2O3 powder and its effect on the wetting behaviour in the system Al2O3p/Al
    Yu, ZQ
    Wu, GH
    Sun, DL
    Jiang, LT
    MATERIALS LETTERS, 2003, 57 (20) : 3111 - 3116
  • [47] Influence of nanosized Al2O3 weight percentage on microstructure and mechanical properties of Al-matrix nanocomposite
    Mahboob, H.
    Sajjadi, S. A.
    Zebarjad, S. M.
    POWDER METALLURGY, 2011, 54 (02) : 148 - 152
  • [48] PREPARATION AND CHARACTERIZATION OF AL2O3 REINFORCED HYDROXYAPATITE
    JI, HX
    MARQUIS, PM
    BIOMATERIALS, 1992, 13 (11) : 744 - 748
  • [49] Effects of coating contents on the interfacial reaction and tensile properties of Al2O3 coated-Al18B4O33w/Al-Mg matrix composites
    Yu, Yucheng
    Tang, Shawei
    Wang, Zhenling
    Hu, Jin
    MATERIALS CHARACTERIZATION, 2015, 107 : 327 - 333
  • [50] Synthesis of Al2O3-NiAl cermets by room-temperature ball milling of Al, Ni and Al2O3 mixtures
    Rocha-Rangel, E.
    Moreno-Guerrero, M. S.
    Velasquez-Naranjo, A.
    Refugio-Barcia, E.
    ADVANCED STRUCTURAL MATERIALS II, 2006, 509 : 123 - 127
12345