Improved tensile properties of Al2O3/Al composite with in-situ generated Al2O3

被引：2
|
作者：
Shi, Wenchao [1 ]
Cui, Beishun [1 ]
Tang, Min [1 ]
Gong, Dongmei [2 ]
Xu, Feng [2 ]
机构：
[1] Hefei Univ Technol, Hefei 230009, Peoples R China
[2] West Anhui Univ, Liuan 237012, Anhui, Peoples R China
来源：
MATERIALS TESTING | 2024年 / 66卷 / 03期
基金：
安徽省自然科学基金;
关键词：
aluminum matrix composite; in situ; tensile property; reinforcement; ball milling;
D O I：
10.1515/mt-2023-0311
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In order to obtain a Al2O3/Al composite with high strength, the Al2O3 generated in situ is served as reinforcement. The ball milling is used to flake pure Al powders. The Al2O3/Al composite with flaked Al powders is obtained by vacuum hot pressing sintering. The effect of the flaked Al powders on the distribution of Al2O3 generated in situ is studied. The hardness and tensile properties of Al2O3/Al composite are studied. The results show that the dehydration temperatures of boric acid in powder mixtures with the flaked Al powders and with the spherical Al powders are 119 degrees C and 128 degrees C, respectively. During sintering stage, the Al2O3 is generated in situ. Compared with the Al2O3/Al composites with the spherical Al powders, more Al2O3 are generated in Al2O3/Al composites with the flaked Al powders. The hardness and ultimate tensile strength of Al2O3/Al composite are higher than those of pure Al alloy.
引用
收藏
页码：359 / 363
页数：5
相关论文
共 50 条
  • [1] Microstructure of in-situ Al2O3/Al composites
    Ji, Y
    Zhong, TX
    Wang, Y
    Tang, JH
    Xu, XD
    JOURNAL OF TRACE AND MICROPROBE TECHNIQUES, 1997, 15 (04): : 489 - 492
  • [2] In-Situ Fabrication of TCP/Al2O3 and Fluorapatite/Al2O3 Composites by Normal Sintering of Hydroxyapatite and Al2O3 Powder Mixtures
    Ha, Jung-Soo
    Han, Yoo-Jeong
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2019, 29 (02): : 129 - 135
  • [3] Influence of in-situ Al2O3 content on mechanical properties of Al2O3 reinforced Fe-Cr-Ni alloys
    Chen, Chang
    Shi, Sitao
    Guo, Zheng
    Li, Guoxin
    Wu, Yonghua
    Su, Mingzhou
    Wang, Huimeng
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (06) : 577 - 581
  • [4] Tensile properties of domestic Al2O3f/Al2O3 composite at room temperature and 1000 °C
    Zhang, Ke
    Xu, Ping
    Zhang, Chao
    Li, Chenchen
    Ying, Enqing
    Xing, Ning
    Li, Mei
    Zhang, Chengyu
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2025, 53 (01): : 195 - 201
  • [5] Synthesis of Al2O3/Ti3Al composites by in-situ displacement reactions
    Rocha-Rangel, Enrique
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2008, 9 (01): : 61 - 63
  • [6] Tensile deformation behavior of a sub-micrometer Al2O3/6061Al composite
    Zhang, Qiang
    Wu, Gaohui
    Jiang, Longtao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 (281-284): : 281 - 284
  • [7] In situ synthesis and properties of ZSM-5/α-Al2O3 composite
    Li, Dianqing
    Wu, Chuang
    Tang, Pinggui
    Feng, Yongjun
    MATERIALS LETTERS, 2014, 133 : 278 - 280
  • [8] ECAP consolidation of Al matrix composites reinforced with in-situ γ-Al2O3 nanoparticles
    Casati, R.
    Fabrizi, A.
    Tuissi, A.
    Xia, K.
    Vedani, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 648 : 113 - 122
  • [9] Microstructure and properties of in-situ Al-Si/Al2O3 composites prepared by displacement reaction
    Sharma, Ashutosh
    Lee, Hansung
    Ahn, Byungmin
    POWDER METALLURGY, 2021, 64 (03) : 192 - 197
  • [10] Mechanical Properties of In-situ Synthesised Nano Al2O3/Al-Zn-Cu Composites
    Liu S.
    Li Z.
    Chen L.
    Li F.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2022, 36 (04): : 307 - 313
12345