Numerical analysis and optimization of combustion and emissions in an ammonia-diesel dual-fuel engine using an ammonia direct injection strategy

被引:19
作者
Shin, Jisoo [1 ]
Park, Sungwook [2 ,3 ]
机构
[1] Hanyang Univ, Dept Mech Convergence Engn, Grad Sch, Seoul 04763, South Korea
[2] Hanyang Univ, Sch Mech Engn, Seoul 04763, South Korea
[3] Hanyang Univ, Sch Mech Engn, 222 Wangsimni Ro, Seoul 04763, South Korea
关键词
Ammonia; Diesel; Compression ignition; High-pressure dual-fuel; Direct injection; NITROGEN CHEMISTRY; BURNING VELOCITY; HIGH-PRESSURE; HYDROGEN; FLAMES;
D O I
10.1016/j.energy.2023.130014
中图分类号
O414.1 [热力学];
学科分类号
摘要
To reduce greenhouse gases in accordance with stringent emission regulations, interest in ammonia, a carbon-free fuel, is increasing in the heavy-duty engine industry. Pre-mixed ammonia-diesel dual-fuel combustion showed better results than diesel combustion in efficiency and greenhouse gas emissions, but NO and unburned NH3 levels were significant. Therefore, a liquid ammonia direct injection strategy should be considered, and that requires detailed combustion and emission formation process analyses. Therefore, in this study, a numerical analysis of the direct injection ammonia-diesel combustion process was conducted, and an optimal injection strategy was sought. Compensating for the slow Hame speed of ammonia by supplying additional momentum to the ammonia through direct injection could improve combustion characteristics. Furthermore, NO removal could be promoted by widening the thermal DeNOx reaction region compared to that in pre-mixed ammonia-diesel combustion. At injection timing was-7 CAD for the ammonia injection and-15 to-10 CAD for the diesel injection, the efficiency increased by 8 %, NO emissions were reduced by up to 13.5 %, and GHG emissions were reduced by about 91 % compared with diesel alone. In addition, unburned ammonia was reduced to least 58.4 ppm, a significant improvement over pre-mixed ammonia combustion.
引用
收藏
页数:19
相关论文
共 62 条
[11]   A review of ammonia as a compression ignition engine fuel [J].
Dimitriou, Pavlos ;
Javaid, Rahat .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (11) :7098-7118
[12]   A review of hydrogen as a compression ignition engine fuel [J].
Dimitriou, Pavlos ;
Tsujimura, Taku .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (38) :24470-24486
[13]   The economics of global green ammonia trade - "Shipping Australian wind and sunshine to Germany" [J].
Egerer, Jonas ;
Grimm, Veronika ;
Niazmand, Kiana ;
Runge, Philipp .
APPLIED ENERGY, 2023, 334
[14]   Thermal N2O decomposition in regenerative heat exchanger reactors [J].
Galle, M ;
Agar, DW ;
Watzenberger, O .
CHEMICAL ENGINEERING SCIENCE, 2001, 56 (04) :1587-1595
[15]   Modeling nitrogen chemistry in combustion [J].
Glarborg, Peter ;
Miller, James A. ;
Ruscic, Branko ;
Klippenstein, Stephen J. .
PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2018, 67 :31-68
[16]  
Gleis S, 2019, SAE Technical Paper, DOI [10.4271/2019-01-2172, DOI 10.4271/2019-01-2172]
[17]   Experimental and kinetic modeling study of laminar burning velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air premixed flames [J].
Han, Xinlu ;
Wang, Zhihua ;
Costa, Mario ;
Sun, Zhiwei ;
He, Yong ;
Cen, Kefa .
COMBUSTION AND FLAME, 2019, 206 :214-226
[18]   Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures [J].
Hayakawa, Akihiro ;
Goto, Takashi ;
Mimoto, Rentaro ;
Arakawa, Yoshiyuki ;
Kudo, Taku ;
Kobayashi, Hideaki .
FUEL, 2015, 159 :98-106
[19]  
Jabbour T., 2004, ASHRAE T, V110, P522
[20]   Pre-chamber combustion system for heavy-duty engines for operating dual fuel and diesel modes [J].
Jisoo, Shin ;
Jonghui, Choi ;
Jaeyeob, Seo ;
Park, Sungwook .
ENERGY CONVERSION AND MANAGEMENT, 2022, 255