Self-healing polymer-based electrolyte induced by amorphous three-dimensional carbon for high-performance solid-state Li metal batteries

Polyethylene oxide (PEO)-based solid-state electrolyte (SSE) is attractive due to its excellent adhesion with electrodes and good processability. However, lithium dendrites easily penetrate PEO because of its soft nature, which results in inferior battery performance and safety issues. Here, a novel self-healing PEO-based SSE is prepared by incorporating 2 wt% amorphous three-dimensional carbon (3DC). This SSE possesses suitably low electronic conductivity for battery applications (on the order of 10-9 S cm- 1), which is five orders of magnitude lower than its ionic conductivity (10-4 S cm- 1) at 60 & DEG;C. In addition, the improved fluidity and strong adhesion between the 3DC and the PEO matrix contribute to the self-healing ability of SSE, which will repair the cracks of SSE formed during battery cycling. Moreover, this SSE shows enhanced ionic and thermal conductivities and mechanical strength, suppressing the formation and growth of lithium dendrites. As a result, this SSE exhibits excellent electrochemical stability, achieving 5000 h of stable cycles in lithium symmetric cell (0.1 mA cm-2, 0.1 mAh cm-2) and 850 long-term stable cycles for the LFP//Li full cell at 1 C (0.31 mA cm-2).