Optimization of high alumina slag practice in blast furnace ironmaking: an industrial approach (PART 1: fundamental aspects)

被引:2
作者
Hazra, Sujan [1 ]
Pal, Snehanshu [2 ]
Biswajeet, Devi Dutta [2 ]
Sahoo, Manisha [1 ]
Tarachand, Garwa Sunny [2 ]
Bhattacharyya, Debanjana [3 ]
Nag, Samik [1 ]
Seetharaman, Seshadri [4 ]
机构
[1] Tata Steel, Jamshedpur 831001, Jharkhand, India
[2] Natl Inst Technol Rourkela, Dept Met & Mat Engn, Rourkela, Odisha, India
[3] Natl Inst Technol Rourkela, Math Dept, Rourkela, Odisha, India
[4] KTH Royal Inst Technol, Dept Mat Sci & Engn, Stockholm, Sweden
关键词
Blast furnace; high alumina slag; viscosity; liquidus temperature; ironmaking; alumina anomaly; additives; flow characteristics; IRON-ORE SLIME; HIGH AL2O3; SIO2-CAO-AL2O3; SLAG; VISCOSITY MODEL; ROTATING BOB; LOW-GRADE; BEHAVIOR; BASICITY; RATIO; MGO;
D O I
10.1080/03019233.2023.2210901
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The productivity of the blast furnace Ironmaking process is significantly dependent on the slag chemistry. The presence of compounds like Al2O3 in high quantities can make the hearth slag highly viscous and difficult to tap. The objective of part-1 of this study is to provide a comprehensive analysis of the role of high alumina (Al2O3 > 15%) compositions in the blast furnace slags. Slag viscosity, liquidus temperature, activation energy, etc., are critically reviewed with respective solutions to operate under the desired conditions. Flow parameters of the slag are examined to understand the melting-softening phenomena which directly affect the slag tap-to-tap time. The addition of certain additives to the slag system has also been studied with the aim to improve the target properties of the slag. A range of slag compositions and their optimization techniques are discussed in this part to provide greater insight into the topic.
引用
收藏
页码:1124 / 1137
页数:14
相关论文
共 108 条
[1]   Means to cope with the higher alumina burden in the blast furnace [J].
Agrawal, Ashish ;
Das, Kanak ;
Singh, Basant Kumar ;
Singh, Rama Shankar ;
Tripathi, Vineet Ranjan ;
Kundu, Subhashis ;
Padmapal ;
Ramna, R., V ;
Singh, Manish Kumar .
IRONMAKING & STEELMAKING, 2020, 47 (03) :238-245
[2]   New Trends in the Application of Carbon-Bearing Materials in Blast Furnace Iron-Making [J].
Ahmed, Hesham .
MINERALS, 2018, 8 (12)
[3]   Viscosity of CaO-SiO2-Al2O3-MgO-B2O3 slags [J].
Babenko A.A. ;
Istomin S.A. ;
Protopopov E.V. ;
Sychev A.V. ;
Ryabov V.V. .
Steel in Translation, 2014, 44 (2) :110-112
[4]   Performance and transition mechanism from acidity to basicity of amphoteric oxides (Al2O3 and B2O3) in SiO2-CaO-Al2O3-B2O3 system: A molecular dynamics study [J].
Bi, Zhisheng ;
Li, Kejiang ;
Jiang, Chunhe ;
Zhang, Jianliang ;
Ma, Shufang ;
Sun, Minmin ;
Wang, Ziming ;
Li, Hongtao .
CERAMICS INTERNATIONAL, 2021, 47 (09) :12252-12260
[5]   Influence of Al2O3, CaO/SiO2, and B2O3 on Viscous Behavior of High Alumina and Medium Titania Blast Furnace Slag [J].
Bian, Lingtao ;
Gao, Yanhong .
JOURNAL OF CHEMISTRY, 2017, 2017
[6]   Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters [J].
Chandran, C. Vinod ;
Kirschhock, Christine E. A. ;
Radhakrishnan, Sambhu ;
Taulelle, Francis ;
Martens, Johan A. ;
Breynaert, Eric .
CHEMICAL SOCIETY REVIEWS, 2019, 48 (01) :134-156
[7]   Experimental Investigation of Relationship between Enthalpy Change and Viscosity in Blast Furnace Type Slags [J].
Chang, Zhi Yu ;
Jiao, Ke Xin ;
Zhang, Jian Liang ;
Ning, Xiao Jun .
ISIJ INTERNATIONAL, 2019, 59 (01) :39-45
[8]   Mullite fabrication from natural kaolin and aluminium slag [J].
Chargui, Fouzia ;
Hamidouche, Mohamed ;
Belhouchet, Hocine ;
Jorand, Yves ;
Doufnoune, Rachida ;
Fantozzi, Gilbert .
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2018, 57 (04) :169-177
[9]   Viscosity Measurement of Slags using Rotating Bob and Vibrating Finger Viscometer [J].
Chebykin, Dmitry ;
Heller, Hans-Peter ;
Dubberstein, Tobias ;
Korobeinikov, Iurii ;
Volkova, Olena .
ISIJ INTERNATIONAL, 2017, 57 (08) :1319-1326
[10]   Viscosities of Iron Blast Furnace Slags [J].
Chen, Mao ;
Zhang, Dianwei ;
Kou, Mingyin ;
Zhao, Baojun .
ISIJ INTERNATIONAL, 2014, 54 (09) :2025-2030