Preparation of amino-functionalized polyethylene-silica composite membrane and FDH immobilization

Enzymatic CO2 conversion represents a highly efficient, energy-conserving, and environmentally sustainable approach to mitigating the increasing pressure caused by huge carbon emissions and generating valuable products. However, several challenges associate with the process including the instability and recovery difficulty of free enzyme, as well as low solubility of CO2 in mild conditions. Immobilizing enzyme on the amino-functionalized supports presents a viable solution to these issues. Considering the wide application of polymer hollow fiber membranes in the field of CO2 gas-liquid membrane contactor and the characteristics of hydrophilic, biocompatible, and high specific surface area of silica nanoparticles, the amino-functionalized polyethylene (PE)-silica (APS) composite membranes were fabricated via different routes. The morphologies, the loading rates of modified SiO2 and reusability of APS membranes were characterized for a crude screening. Following that, seven kinds of APS membranes were used as the carriers of formate dehydrogenase (FDH) that could catalyze the reduction of CO2 to formate, and their immobilization efficiency and catalytic performance were compared. The results show that 1# and 2# membranes based on carboxyl-modified PE with a loading rate of 5.5 %similar to 5.6 % and the reusability of above 99 % were more ideal carriers than others. The enzyme activity recovery rate of APS-immobilized FDH (FDH-APS) was separately 367 % and 256 %, proving the intensification action of carriers on the enzymatic reaction. After 10 cycles of use, the relative activity of two kinds of FDH-APS was around 70 % and 78 %, much higher than corresponding particles or membrane attached FDH (25.3 % and 20.4 %). After storage at 4 degrees C for 20 days, the relative activity of FDH-APS was 82.7 % and 81.0 %, while it was only 61.4 % for free enzyme.