Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Traditional carbon capture and storage technologies for large point sources can at best slow the rate of increase in atmospheric CO2 concentrations. In contrast, direct capture of CO2 from ambient air, or "direct air capture" (DAC), offers the potential to become a truly carbon-negative technology. Composite solid adsorbents fabricated by impregnating a porous matrix with K2CO3 are promising adsorbents for the adsorption capture of CO2 from ambient air. Nevertheless, the adsorbent can be rapidly deactivated during continuous adsorption/desorption cycles. In this study, MgO-supported, TiO2-stabilized MgO@TiO2 core-shell structures were prepared as supports using a novel self-assembled (SA) method and then impregnated with 50 wt % K2CO3 (K2CO3/MgO@TiO2, denoted as SA-KM@T). The adsorbent exhibits a high CO2 capture capacity of similar to 126.6 mg CO2/g sorbent in direct air adsorption and maintained a performance of 20 adsorption/desorption cycles at 300 degrees C mid-temperature, which was much better than that of K2CO3/MgO. Analysis proved that the core-shell structure of the support effectively inhibited the reaction between the active component (K2CO3) and the main support (MgO) by the addition of TiO2, resulting in higher reactivity, thermal stability, and antiagglomeration properties. This work provides an alternative strategy for DAC applications using adsorbents.