Experimental evaluation of the effect of leakage in scroll compressor

被引:0
作者
Shikalgar, Niyaj Dilavar [1 ]
Sapali, Shivalingappa Nagappa [1 ]
Shinde, Ajit [1 ]
机构
[1] Coll Engn Pune, Dept Mech Engn, Pune 411005, Maharashtra, India
来源
JOURNAL OF THERMAL ENGINEERING | 2023年 / 10卷 / 01期
关键词
Scroll Compressor; Leakage Model; Axial Clearance; Mass Flow Rate; DOMESTIC REFRIGERATOR; FLOW;
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
This research gives an experimental investigation of the scroll compressor, with an emphasis on the effect of leakage on performance enhancement. The effect of gas leakage losses on compressor performance is studied both experimentally and conceptually. In the present study, we have modified the scroll compressor to bypass the refrigerant through an orifice called leakage and experimentally investigate the effect of valve opening area and angle to observe the effect of leak gas on compressor performance, compressor capacity loss, discharge line temperature rise, and discharge gas temperature. Experimental results indicated that the maximum percentage rise in suction superheat is observed to be 7.13% at a maximum effective valve opening area of 0.33 m2, whereas the rise in discharge line temperature lies in the range of 0.8% to 2.75% over the entire range of effective leak area. In addition, based on experimentation the 8.9 % maximum compressor capacity loss is observed.Cite this article as: Shikalgar ND, Sapali SN, Shinde A. Experimental evaluation of the effect of leakage in scroll compressor. J Ther Eng 2023;9(5):1219-1227.
引用
收藏
页码:1219 / 1227
页数:9
相关论文
共 22 条
  • [1] [Anonymous], 2015, AHRI standard 540
  • [2] Barton N, 2004, N SEA FLOW MEAS WORK
  • [3] Chen Y, 2000, Mathematical modeling of scroll compressor
  • [4] Copeland General Product Guide, 2018, GPC-2018-EN
  • [5] Deshmukh P, 2022, J Therm Eng, V6, P772
  • [6] Diniz MC, 2012, INT COMPR ENG C PURD
  • [7] Ishii N, 1996, INT COMPR ENG C PURD
  • [8] Jidge A, 2020, M Tech Thesis
  • [9] Lemort V, 2007, INT C MECH DES, P1453
  • [10] MAERTENS MJ, 1992, PROCEEDINGS OF THE 1992 INTERNATIONAL COMPRESSOR ENGINEERING CONFERENCE AT PURDUE, VOLS 1-4, P587