Effects of Ni-based composite coatings on failure mechanism and wear resistance of cutting picks on coal shearer machine

被引：9
作者：
Eshaghian, Omid [1 ]
Hoseinie, Seyed Hadi [1 ,3 ]
Jazi, Hamidreza Salimi [2 ]
机构：
[1] Isfahan Univ Technol, Dept Min Engn, Esfahan, Iran
[2] Isfahan Univ Technol, Dept Mat Engn, Esfahan, Iran
[3] Isfahan Univ Technol, Dept Min Engn, Esfahan 8415683111, Iran
来源：
ENGINEERING FAILURE ANALYSIS | 2023年 / 151卷
关键词：
Coal mining; Shearer pick; Ni-based composites; Laser cladding; Field analysis; Wear; Surface hardening; BEHAVIOR; PERFORMANCE;
D O I：
10.1016/j.engfailanal.2023.107342
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The performability and wear resistance of the cutting picks play an important role in the extraction operation of mining machinery especially drum shearers in longwall coal mines. Tungsten carbide tip fracture and removal, and severe wear of the pick body are the major failures that affect the performance of these picks. The coating could be a proper solution for strengthening the coal-cutting tools and extension of their useful life. In this paper, a Ni-based ultrafine coating, NiBSiFeWC, deposited by laser-cladding technique, has been applied to improve the wear resistance and mechanical properties of the coal-cutting picks. All cutting tests were carried out on a drum shearer machine and on a real-scale operation, which makes the study much more realistic and effectively applicable for advanced tools' developments in mechanized longwall mines. The archived results show that NiBSiFeWC coating reduced the tool wear rate by about 50%.
引用
收藏
页数：16
相关论文
共 39 条
  • [11] RELIABILITY-CENTERED MAINTENANCE FOR SPRAY JETS OF COAL SHEARER MACHINE
    Hoseinie, S. H.
    Ahmadi, A.
    Ghodrati, B.
    Kumar, U.
    [J]. INTERNATIONAL JOURNAL OF RELIABILITY QUALITY AND SAFETY ENGINEERING, 2013, 20 (03)
  • [12] Reliability analysis of drum shearer machine at mechanized longwall mines
    Hoseinie, Seyed
    Ataei, Mohammad
    Khalokakaie, Reza
    Ghodrati, Behzad
    Kumar, Uday
    [J]. JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING, 2012, 18 (01) : 98 - +
  • [13] Jiang Z., 2001, J TSINGHUA U, V41, P23
  • [14] Kang X.M., 2002, J COAL MINE MACH, V22, P23
  • [15] Assessment of wear performance of flame sprayed and fused Ni-based coatings
    Kim, HJ
    Hwang, SY
    Lee, CH
    Juvanon, P
    [J]. SURFACE & COATINGS TECHNOLOGY, 2003, 172 (2-3) : 262 - 269
  • [16] Kumar M.P., 2015, Int. J. Innov. Res. Sci. Technol., V2, P126
  • [17] Li C.X., WEAR WEAR MECH
  • [18] Development of Hard Rock Cutting Tool with Advanced Diamond Composites
    Li, X. S.
    Sun, Y.
    [J]. MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 1831 - 1835
  • [19] The wear characteristics of superhard composite materials in abrasive cutting operations
    Li, XS
    Boland, JN
    [J]. WEAR, 2005, 259 : 1128 - 1136
  • [20] Experimental research on wear of conical pick interacting with coal-rock.
    Liu, Songyong
    Ji, Huifu
    Liu, Xiaohui
    Jiang, Hongxiang
    [J]. ENGINEERING FAILURE ANALYSIS, 2017, 74 : 172 - 187
1234