Optimization of window solar gain for a building with less cooling load

被引：9

作者：

Mustafa, Jawed ^{[1
]}

Alqaed, Saeed ^{[1
]}

Sharifpur, Mohsen ^{[2
,3
]}

Meyer, Josua ^{[4
]}

机构：

[1] Najran Univ, Coll Engn, Mech Engn Dept, POB 1988, Najran 61441, Saudi Arabia

[2] Univ Pretoria, Dept Mech & Aeronaut Engn, Pretoria, South Africa

[3] China Med Univ, China Med Univ Hosp, Dept Med Res, Taichung, Taiwan

[4] Stellenbosch Univ, Dept Mech & Mechatron Engn, Stellenbosch, South Africa

来源：

CASE STUDIES IN THERMAL ENGINEERING | 2024年 / 53卷

关键词：

Building energy demand; Optimization; Shadow; Solar radiation; PERFORMANCE; SHUTTER;

D O I：

10.1016/j.csite.2023.103890

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Considering solar gain through the window (SGW), this study investigated the effects of installing shading on cooling load. Approving energy analysis for the base building (without shading), the cooling, heating, and annual energy demand were calculated. The best window angle and the best shading projection were obtained using the genetic algorithm. For the yearly minimum energy demand scenario, it was found that the window should be placed in the south direction, accompanied by the shading project with a maximum length of 20 cm. The results of the genetic algorithm revealed that for windows at the angle of 75-90 degrees, the positive shading effects on annual energy demand become maximum. In this case, the shading reduces the yearly energy consumption by 3.1 %. The optimization showed that the shades have the best results for reducing the cold load for windows that are located in the azimuth angle between 135 and 180 degrees.

引用

页数：14

共 30 条

[1] The thermal potential of a new multifunctional sliding window [J].

Ahmed, Mostafa M. S. ;

Radwan, Ali ;

Serageldin, Ahmed A. ;

Abdeen, Ahmed ;

Abo-Zahhad, Essam M. ;

Nagano, Katsunori .

SOLAR ENERGY, 2021, 226 :389-407

[2] Effect of an incompletely closed window shutter on indoor illuminance level and heat gain [J].

Alawadhi, Esam M. .

ENERGY AND BUILDINGS, 2016, 110 :112-119

[3] Using phase change materials in window shutter to reduce the solar heat gain [J].

Alawadhi, Esam M. .

ENERGY AND BUILDINGS, 2012, 47 :421-429

[4] Using proportional-integral-derivative controllers and PCM and a new design of building air intake with five scenarios to present a multi-zone CAV-AHU for tackling high energy consumption [J].

Alghamdi, Sultan M. ;

Ajour, Mohammed N. ;

Abu-Hamdeh, Nidal H. ;

Karimipour, Arash .

JOURNAL OF BUILDING ENGINEERING, 2022, 56

[5]

[Anonymous], 2005, ASHRAE FUNDAMENTALS

[6] Improve decision-making process and reduce risks in the energy retrofit of existing buildings through uncertainty and sensitivity analysis [J].

Carpino, C. ;

Bruno, R. ;

Carpino, V. ;

Arcuri, N. .

ENERGY FOR SUSTAINABLE DEVELOPMENT, 2022, 68 :289-307

[7] Sustainable building climate control with renewable energy sources using nonlinear model predictive control [J].

Chen, Wei-Han ;

You, Fengqi .

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2022, 168

[8] Effect of fixed horizontal louver shading devices on thermal performance of building by TRNSYS simulation [J].

Datta, G .

RENEWABLE ENERGY, 2001, 23 (3-4) :497-507

[9] Toward buildings with lower power demand in the smart city of NEOM-incorporating phase change material into building envelopes [J].

Fagehi, Hassan ;

Hadidi, Haitham M. .

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2022, 53

[10] Historical building renovation and PV optimisation towards NetZEB in Sweden [J].

Gremmelspacher, Jonas Manuel ;

Pizarro, Rafael Campama ;

van Jaarsveld, Matthijs ;

Davidsson, Henrik ;

Johansson, Dennis .

SOLAR ENERGY, 2021, 223 :248-260

← 1 2 3 →