Analysis of the Anomalous Effect of Heat Treatment on the Structure and Phase Transformations in High-Chromium Tool Steel

被引：2
作者：
Belomytsev, M. Yu. [1 ]
机构：
[1] MISiS Res & Engn Univ, Moscow, Russia
来源：
METAL SCIENCE AND HEAT TREATMENT | 2023年 / 65卷 / 7-8期
关键词：
tool steels; heat treatment; microhardness; austenite; martensite; thermal aging; structural class of steels;
D O I：
10.1007/s11041-023-00948-5
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of various heat treatments with heating to 1030 - 1250 degrees C on the structure and microhardness of high-chromium tool steel 160Kh12MF is studied. The chemical composition is determined, the microhardness is measured, and the microstructure of the steel is analyzed after quenching, normalizing and annealing. It is shown that the customary heat treatments (quenching from the austenitic range for hardening and annealing for softening) may have an effect opposite to the expected one. This phenomenon may be caused by phase transformations of the austenite during its cooling due to precipitation of carbides. It is established that super-cooled austenite is resistant to martensitic transformation, deformation, and cold treatment after rapid cooling. Aging of the martensite and its decomposition into martensite and carbides with growth of the microhardness are observed at the temperatures no lower than 750 degrees C.
引用
收藏
页码：410 / 414
页数：5
相关论文
共 12 条
  • [1] [Беломытцев Михаил Юрьевич Belomytsev M.Yu.], 2017, [Металлург, Metallurg], P46
  • [2] [Беломытцев М.Ю. Belomyttsev M.Yu.], 2017, [Заводская лаборатория. Диагностика материалов, Zavodskaya laboratoriya. Diagnostika materialov], V83, P41, DOI 10.26896/1028-6861-2017-83-11-41-46
  • [3] [Беломытцев М.Ю. Belomyttsev M.Yu.], 2017, [Известия высших учебных заведений. Черная металлургия, Izvestia. Ferrous Metallurgy, Izvestiya vysshikh uchebnykh zavedenii. Chernaya metallurgiya], V60, P732, DOI 10.17073/0368-0797-2017-9-732-738
  • [4] [Дарвиши Алиреза Darvishi Alireza], 2022, [Металловедение и термическая обработка металлов, Metallovedenie i termicheskaya obrabotka metallov], P16
  • [5] Geller Yu. A., 1975, Tool steels
  • [6] Influence of Mg addition on inclusions and mechanical properties of Cr12Mo1V1 steel under high pressure
    Gong, Wei
    Jiang, Zhouhua
    Zhang, Lixiang
    Chen, Changyong
    Dong, Yanwu
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 791
  • [7] GOST, 595073 GOST
  • [8] Gulyaev A. P., 1975, HIGH SPEED STEELS
  • [9] Gulyaev A. P., 1976, MET SCI
  • [10] Jonson CR., 1962, T ASM, V55, P277
12