Application of the Gradient-Based Metaheuristic Optimizerto Solve the Optimal Conductor Selection Problemin Three-Phase Asymmetric Distribution Networks

This study addresses the problem of selecting the conductor sizes for medium-voltage distribution networks with radial configurations. The optimization model that represents this problem is part of the mixed-integer non-linear programming (MINLP) models, in which a power flow must be solved for each possible combination of conductor sizes. The main objective of this optimization problem is to find the best set of conductor sizes that minimize an economic objective function composed of the total costs of conducting materials added with the expected annual costs of the energy losses by proposing a new hybrid optimization methodology from the family of combinatorial optimization methods. To solve the MINLP model, a master-slave optimization method based on the modified version of the gradient-based metaheuristic optimizer (MGbMO) combined with the successive approximation power flow method for unbalanced distribution networks is presented. The MGbMO defines the set of conductor sizes assignable for each distribution line using an integer codification. The slave stage (three-phase power flow) quantifies the total power losses and their expected annual operating costs. Numerical results in the IEEE 8-, 27-, and 85-bus grids demonstrate the effectiveness of the proposed master-slave optimizer when compared with multiple combinatorial optimization methods (vortex search algorithm, the Newton-metaheuristic optimizer, the traditional and Chu and Beasley genetic algorithms, and the tabu search approaches). Two scenarios regarding the demand behavior were analyzed for the IEEE 8- and 27-bus grids: a peak load operation was considered, and, for the IEEE 85-bus grid, the daily demand behavior, including the presence of renewable generators, was considered. The 85-bus grid allowed showing that the most realistic operative scenario for selecting conductors is the case where a demand curve is implemented since reductions over 40% in the annual investment and operating costs were found when compared to the peak load operating condition. All numerical validations were performed in MATLAB software.