Performance evaluation of a solar desalination-hot water system using heat pipe vacuum tube parabolic trough solar collector-An experimental study with Taguchi analysis

被引:57
作者
Omidi, Bagher [1 ]
Rahbar, Nader [2 ]
Kargarsharifabad, Hadi [2 ,3 ]
Moziraji, Zahra Poolaei [1 ]
机构
[1] Islamic Azad Univ, Dept Mech Engn, North Tehran Branch, Tehran, Iran
[2] Islamic Azad Univ, Energy & Sustainable Dev Res Ctr, Semnan Branch, Semnan, Iran
[3] Islamic Azad Univ, Prod & Recycling Mat & Energy Res Ctr, Qom Branch, Qom, Iran
关键词
Solar desalination; Parabolic trough solar collector; Heat pipe vacuum tube; Taguchi-method; Design of experiments; ECONOMIC-ANALYSIS; EVACUATED TUBE; ENERGY MATRICES; WORKING FLUID; STILL; OPTIMIZATION; ENHANCEMENT; EXERGY; BASIN; FLOW;
D O I
10.1016/j.enconman.2023.117347
中图分类号
O414.1 [热力学];
学科分类号
摘要
The utilization of renewable energy to generate hot water and distilled water can considerably reduce pollution. This study looked at a hybrid system that used a parabolic-trough heat pipe solar collector to generate hot water while also providing drinking water. The system is constructed in two stages, the first producing distilled water and the second producing hot water. A concave mirror increases the temperature of a vacuum tube heat pipe's evaporator area and the condenser of the heat pipe, which is directly connected to the desalination system's saltwater tank. To improve the amount of drinking water generated and to transfer thermal energy to the hot water generation system, a condenser region at the top of the saltwater tank, as well as multiple heat pipes, were employed. The effect of the water flow rate (200, 300, 400 and 500 ml/min), number of heat pipes (0, 1, 2 and 4), and the filling porous medium (0, 0.3, 0.6 and 0.9 m) of the vacuum tube on the system performance were evaluated. In addition, Taguchi-Based design of experiments was used to determine the effect of independent input parameters on the energy and efficiency of the system. The results showed that the effects of water flow rate, porous medium length, and number of heat pipes on the energy efficiency were approximately 50.89%, 26.53%, and 20.6%, respectively. Furthermore, the cost of distilled water and the cost of hot water were approximately 0.0380 $/L and 1.01 $/m3, respectively. Additionally, the highest daily productivity of the system (4940 ml/day) was obtained with a water flow rate of 200 ml/min, a length of porous media of 0.6 m, and four heat pipes. The CO2 emission reduction based on the environmental and enviroexergoeconomic parameters of the proposed systems ware improved by 37.5% and 268.4%, respectively, resulting in returns of approximately $358.1 and $260.5, respectively.
引用
收藏
页数:14
相关论文
共 50 条
[31]   Performance study on evacuated tube solar collector using therminol D-12 as heat transfer fluid coupled with parabolic trough [J].
Selvakumar, P. ;
Somasundaram, P. ;
Thangavel, P. .
ENERGY CONVERSION AND MANAGEMENT, 2014, 85 :505-510
[32]   Design and Experimental Analysis of Heat Pipe Solar Collector Drying System [J].
Dumrul, Hakan ;
Kaya, Edanur ;
Yilmaz, Sezayi .
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2023, 26 (02) :583-592
[33]   Thermal Performance Enhancement Using Absorber Tube with Inner Helical Axial Fins in a Parabolic Trough Solar Collector [J].
Zaboli, Mohammad ;
Ajarostaghi, Seyed Soheil Mousavi ;
Saedodin, Seyfolah ;
Pour, Mohsen Saffari .
APPLIED SCIENCES-BASEL, 2021, 11 (16)
[34]   Coupling of a parabolic solar dish collector to finned-tube heat exchangers for hot air production: An experimental and theoretical study [J].
Karimi, Reza ;
Gheinani, Touraj Tavakoli ;
Avargani, Vahid Madadi .
SOLAR ENERGY, 2019, 187 :199-211
[35]   Performance of finned heat pipe assisted parabolic trough solar collector system under the climatic condition of North East India [J].
Bhagwat, Virendra Vishnu ;
Roy, Sujit ;
Das, Biplab ;
Shah, Nikhilkumar ;
Chowdhury, Avijit .
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2021, 45
[36]   Thermal performance evaluation of the parabolic trough solar collector using nanofluids: A case study in the desert of Algeria [J].
Benrezkallah, Anfal ;
Marif, Yacine ;
Soudani, Mohammed Elbar ;
Belhadj, Mohamed Mustapha ;
Hamidatou, Taha ;
Mekhloufi, Naima ;
Aouachir, Ahlam .
CASE STUDIES IN THERMAL ENGINEERING, 2024, 60
[37]   Performance improvement of a heat pipe evacuated solar water collector using quartz/water nanofluid: A numerical and experimental study [J].
Aytac, Ipek ;
Khanlari, Ataollah ;
Tuncer, Azim Dogus ;
Variyenli, Halil Ibrahim ;
Unvar, Sinan .
RENEWABLE ENERGY, 2024, 236
[38]   Experimental investigation of the effect of using water and ethanol as working fluid on the performance of pyramid-shaped solar still integrated with heat pipe solar collector [J].
Fallahzadeh, Rasoul ;
Aref, Latif ;
Gholamiarjenaki, Nabiollah ;
Nonejad, Zeinab ;
Saghi, Mohammadreza .
SOLAR ENERGY, 2020, 207 :10-21
[39]   Development and thermodynamic analysis of a novel heat pipe vacuum tube solar collector with sensible heat storage [J].
Sachdeva, Anshul ;
Chandrashekara, M. ;
Yadav, Avadhesh .
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (01) :1511-1532
[40]   Experimental performance evaluation of an auto-tracking parabolic trough solar collector with recirculation of nanofluids [J].
Farhan, Muhammad ;
Hassan, Faisal ;
Zubair, Muhammad ;
Jamil, Furqan ;
Shahid, Ihsan ;
Khiadani, Mehdi ;
Ali, Hafiz Muhammad .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2025, 150 (05) :3529-3548