Performance evaluation of a solar desalination-hot water system using heat pipe vacuum tube parabolic trough solar collector-An experimental study with Taguchi analysis

被引:48
作者
Omidi, Bagher [1 ]
Rahbar, Nader [2 ]
Kargarsharifabad, Hadi [2 ,3 ]
Moziraji, Zahra Poolaei [1 ]
机构
[1] Islamic Azad Univ, Dept Mech Engn, North Tehran Branch, Tehran, Iran
[2] Islamic Azad Univ, Energy & Sustainable Dev Res Ctr, Semnan Branch, Semnan, Iran
[3] Islamic Azad Univ, Prod & Recycling Mat & Energy Res Ctr, Qom Branch, Qom, Iran
关键词
Solar desalination; Parabolic trough solar collector; Heat pipe vacuum tube; Taguchi-method; Design of experiments; ECONOMIC-ANALYSIS; EVACUATED TUBE; ENERGY MATRICES; WORKING FLUID; STILL; OPTIMIZATION; ENHANCEMENT; EXERGY; BASIN; FLOW;
D O I
10.1016/j.enconman.2023.117347
中图分类号
O414.1 [热力学];
学科分类号
摘要
The utilization of renewable energy to generate hot water and distilled water can considerably reduce pollution. This study looked at a hybrid system that used a parabolic-trough heat pipe solar collector to generate hot water while also providing drinking water. The system is constructed in two stages, the first producing distilled water and the second producing hot water. A concave mirror increases the temperature of a vacuum tube heat pipe's evaporator area and the condenser of the heat pipe, which is directly connected to the desalination system's saltwater tank. To improve the amount of drinking water generated and to transfer thermal energy to the hot water generation system, a condenser region at the top of the saltwater tank, as well as multiple heat pipes, were employed. The effect of the water flow rate (200, 300, 400 and 500 ml/min), number of heat pipes (0, 1, 2 and 4), and the filling porous medium (0, 0.3, 0.6 and 0.9 m) of the vacuum tube on the system performance were evaluated. In addition, Taguchi-Based design of experiments was used to determine the effect of independent input parameters on the energy and efficiency of the system. The results showed that the effects of water flow rate, porous medium length, and number of heat pipes on the energy efficiency were approximately 50.89%, 26.53%, and 20.6%, respectively. Furthermore, the cost of distilled water and the cost of hot water were approximately 0.0380 $/L and 1.01 $/m3, respectively. Additionally, the highest daily productivity of the system (4940 ml/day) was obtained with a water flow rate of 200 ml/min, a length of porous media of 0.6 m, and four heat pipes. The CO2 emission reduction based on the environmental and enviroexergoeconomic parameters of the proposed systems ware improved by 37.5% and 268.4%, respectively, resulting in returns of approximately $358.1 and $260.5, respectively.
引用
收藏
页数:14
相关论文
共 50 条
  • [21] Experimental investigation of a novel solar air heater based on heat pipe vacuum tube collector integrated with finned-tube heat exchanger
    Sachdeva, Anshul
    Chandrashekara, M.
    Yadav, Avadhesh
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2023, 148 (20) : 10917 - 10936
  • [22] Heat Transfer Studies on Solar Parabolic trough Collector Using Corrugated Tube Receiver with Conical Strip Inserts
    Venkatesaperumal, Ramalingam
    Syed Jafar, Kutbudeen
    Elumalai, Perumal Venkatesan
    Abbas, Mohamed
    Cuce, Erdem
    Shaik, Saboor
    Saleel, Chanduveetil Ahamed
    SUSTAINABILITY, 2023, 15 (01)
  • [23] An experimental study on energetic performance evaluation of a parabolic trough solar collector operating with Al2O3/water and GO/water nanofluids
    Hosseini, Seyed Mohammad Sadegh
    Dehaj, Mohammad Shafiey
    ENERGY, 2021, 234 (234)
  • [24] Performance Evaluation of Dual-axis Tracking System of Parabolic Trough Solar Collector
    Ullah, Fahim
    Min, Kang
    5TH ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENVIRONMENTAL ENGINEERING (MSEE2017), 2018, 301
  • [25] Experimental and Model Based Performance Analysis of a Linear Parabolic Trough Solar Collector in a High Temperature Solar Cooling and Heating System
    Qu, Ming
    Yin, Hongxi
    Archer, David H.
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132 (02): : 0210041 - 02100412
  • [26] Experimental and CFD analysis of dimple tube parabolic trough solar collector (PTSC) with TiO2 nanofluids
    Arun, M.
    Barik, Debabrata
    Sridhar, K. P.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2022, 147 (24) : 14039 - 14056
  • [27] Performance analysis of nanofluid-based water desalination system using integrated solar still, flat plate and parabolic trough collectors
    Hassan, Hafiz Muhammad Ali
    Amjad, Muhammad
    Tahir, Zia Ur Rehman
    Qamar, Adnan
    Noor, Fahad
    Hu, Yanwei
    Bin Yaqub, Talha
    Bandarra Filho, Enio P.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (09)
  • [28] Design and Experimental Analysis of Heat Pipe Solar Collector Drying System
    Dumrul, Hakan
    Kaya, Edanur
    Yilmaz, Sezayi
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2023, 26 (02): : 583 - 592
  • [29] Performance study on evacuated tube solar collector using therminol D-12 as heat transfer fluid coupled with parabolic trough
    Selvakumar, P.
    Somasundaram, P.
    Thangavel, P.
    ENERGY CONVERSION AND MANAGEMENT, 2014, 85 : 505 - 510
  • [30] Thermal Performance Enhancement Using Absorber Tube with Inner Helical Axial Fins in a Parabolic Trough Solar Collector
    Zaboli, Mohammad
    Ajarostaghi, Seyed Soheil Mousavi
    Saedodin, Seyfolah
    Pour, Mohsen Saffari
    APPLIED SCIENCES-BASEL, 2021, 11 (16):