Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding

被引：0

作者：

Farajollahi, Ramezanali ^{[1
]}

Aval, Hamed Jamshidi ^{[1
]}

Jamaati, Roohollah ^{[1
]}

Javidani, Mousa ^{[2
]}

机构：

[1] Babol Noshirvani Univ Technol, Dept Mat Engn, Shariati Ave, Babol 4714871167, Iran

[2] Univ Quebec Chicoutimi, Dept Appl Sci, Saguenay, PQ G7H 2B1, Canada

来源：

JOM | 2023年 / 75卷 / 11期

关键词：

ABNORMAL GRAIN-GROWTH; MECHANICAL-PROPERTIES; CORROSION BEHAVIOR; TENSILE BEHAVIOR; ALUMINUM; MICROSTRUCTURE; RESISTANCE; EVOLUTION; STRENGTH;

D O I：

10.1007/s11837-023-06099-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present work, the influences of non-isothermal aging (NIA) and isothermal aging (T6 treatment) on mechanical properties and corrosion resistance of nickel-aluminide reinforced Al-Cu-Mg aluminum alloy composite cladding have been investigated. The claddings were performed using the AA2024 mechtrod by friction surfacing process. Results show that using NIA treatment, the hardness and strength increased significantly compared to T6 treatment, regardless of the type of claddings. The hardness and strength measurements of nickel-reinforced containing cladding after NIA treatment were 16.4% and 9% higher than for the T6 treatment, respectively. Additionally, by applying NIA treatment, the corrosion behavior of the claddings with and without nickel-aluminide is 64% and 50% superior compared to the Al-Cu-Mg alloy substrate.

引用

页码：4931 / 4945

页数：15

共 54 条

[1] Corrosion studies of Alx-Ni insitu intermetallics reinforced Al metal matrix composites [J].

Abuthakir, J. ;

Subramanian, R. ;

Kavitha, M. ;

Venkatesh, G. ;

Kumar, K. Krishna ;

Manikandan, P. .

MATERIALS TODAY-PROCEEDINGS, 2020, 28 :1158-1163

[2] Evaluating high-temperature mechanical behavior of cast Mg-4Zn-xSb magnesium alloys by shear punch testing [J].

Alizadeh, R. ;

Mahmudi, R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17) :3975-3983

[3] Effect of friction stir processing on microstructure and tensile behavior of AA6061/Al3Fe cast aluminum matrix composites [J].

Balakrishnan, M. ;

Dinaharan, I. ;

Palanivel, R. ;

Sathiskumar, R. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 785 :531-541

[4] Effect of non-isothermal aging on microstructure and mechanical properties of friction surfaced AA5083-15wt%Zn composites [J].

Bararpour, Seyedeh Marjan ;

Aval, Hamed Jamshidi ;

Jamaati, Roohollah .

SURFACE & COATINGS TECHNOLOGY, 2020, 384

[5] Mechanical alloying by friction surfacing process [J].

Bararpour, Seyedeh Marjan ;

Aval, Hamed Jamshidi ;

Jamaati, Roohollah .

MATERIALS LETTERS, 2019, 254 :394-397

[6] Modeling and experimental investigation on friction surfacing of aluminum alloys [J].

Bararpour, Seyedeh Marjan ;

Aval, Hamed Jamshidi ;

Jamaati, Roohollah .

JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 805 :57-68

[7] Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation microstructures [J].

Bo, Guowei ;

Wang, Yinlu ;

Liu, Mingcai ;

Tang, Jie ;

Jiang, Fulin ;

Teng, Jie ;

Xiao, Gang ;

Fu, Dingfa ;

Zhang, Hui .

MATERIALS & DESIGN, 2022, 217

[8] Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys [J].

Chang, CI ;

Lee, CJ ;

Huang, JC .

SCRIPTA MATERIALIA, 2004, 51 (06) :509-514

[9] Abnormal grain growth in friction stir processed alloys [J].

Charit, I. ;

Mishra, R. S. .

SCRIPTA MATERIALIA, 2008, 58 (05) :367-371

[10] Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites [J].

Dinaharan, I. ;

Balakrishnan, M. ;

Selvam, J. David Raja ;

Akinlabi, E. T. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 781 :270-279

← 1 2 3 4 5 6 →