Numerical Simulation and Flexural Capacity of Hybrid-Bonded FRP Reinforced Concrete Beam

被引：2
作者：
Zhang, Feng [1 ]
Gao, Lei [1 ]
Zhang, Luke [1 ]
机构：
[1] Shandong Univ, Geotech & Struct Engn Res Ctr, Jinan 250061, Peoples R China
来源：
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2023年 / 48卷 / 10期
关键词：
Numerical model; Hybrid bonding FRP; Anchor distribution; Flexural capacity; Failure mode; RC BEAMS; POLYMER; THICKNESS; STRENGTH; BEHAVIOR;
D O I：
10.1007/s13369-022-07587-7
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
Hybrid bonding FRP-reinforced concrete structures has been verified through tests for improving the material efficiency and structural bearing capacity, but detailed analysis of the anchor distribution are still scarce, especially considering the beam length parameter, therefore, a numerical simulation is conducted to study the effect of anchors on the flexural behavior of externally bonded FRP-reinforced concrete beams. The numerical model is verified first, and the effect of the beam length parameter on the anchor distribution is analyzed. It is found that the bonding behavior of the beam with the same cross section is closely related to the moment, regardless of the beam length. For beams with the same design moment, the anchor spacing is suggested to increase with the beam length but remain the anchor width. A design methodology of hybrid bonding FRP-reinforced concrete beam that considers different failure modes are proposed, and the predicted flexural capacity is verified by the test result.
引用
收藏
页码：12845 / 12858
页数：14
相关论文
共 50 条
[41]   MODELING THE FLEXURAL CAPACITY OF REINFORCED CONCRETE BEAM WITH PARTIALLY UNBONDED LENGTH [J].
Wang, X. H. .
ADVANCES IN CONCRETE STRUCTURAL DURABILITY, PROCEEDINGS OF ICDCS2008, VOLS 1 AND 2, 2008, :896-902
[42]   Experimental and finite element studies on the flexural behavior of reinforced concrete elements strengthened with hybrid FRP technique [J].
Chellapandian, M. ;
Prakash, S. Suriya ;
Sharma, Akanshu .
COMPOSITE STRUCTURES, 2019, 208 :466-478
[43]   Numerical study on flexural behaviour of FRP reinforced concrete beams with compression yielding blocks [J].
Shen, Xinyu ;
Li, Bo ;
Shi, Weizhuo ;
Chen, Yung-Tsang .
CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
[44]   Experimental and numerical study of the flexural capacity of reinforced concrete Vierendeel beams [J].
Lu, Hongna ;
Zhang, Huagang ;
Ma, Kejian ;
Li, Li ;
Chen, Hongniao ;
Wu, Qin ;
Jiang, Lan .
STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2022, 31 (03)
[45]   Assessment of design procedures for the use of externally bonded FRP composites in shear strengthening of reinforced concrete beams [J].
Pellegrino, Carlo ;
Vasic, Mira .
COMPOSITES PART B-ENGINEERING, 2013, 45 (01) :727-741
[46]   Effects of FRP bar type and fiber reinforced concrete on the flexural behavior of hybrid beams [J].
Aydin, Emine ;
Boru, Elif ;
Aydin, Ferhat .
CONSTRUCTION AND BUILDING MATERIALS, 2021, 279
[47]   Numerical simulation and data-driven analysis on the flexural performance of steel reinforced concrete composite members [J].
Lai, Bing-Lin ;
Yang, Lifu ;
Xiong, Ming-Xiang .
ENGINEERING STRUCTURES, 2021, 247
[48]   Flexural behavior of reinforced concrete beam using CFRP hybrid system [J].
Obaidat, Ala' Taleb .
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING, 2022, 26 (13) :6165-6187
[49]   The statistical evaluation of design methods of the load-carrying capacity of flexural reinforced concrete elements strengthened with FRP [J].
Skuturna, T. ;
Valivonis, J. .
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2015, 15 (01) :214-222
[50]   Flexural strengthening of reinforced concrete beams using hybrid near-surface embedded/externally bonded fabric-reinforced cementitious matrix [J].
El-Sherif, HossamEldin ;
Wakjira, Tadesse G. ;
Ebead, Usama .
CONSTRUCTION AND BUILDING MATERIALS, 2020, 238
12345