Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

被引:5
|
作者
Balamurugan, S. [1 ]
Seenivasan, D. [2 ]
Kalos, Pritam S. [3 ]
Gupta, S. [4 ]
机构
[1] Sri Krishna Coll Engn & Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
[2] Coimbatore Inst Engn & Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
[3] MIT Acad Engn, Sch Mech & Civil Engn, Pune, Maharashtra, India
[4] JECRC Univ, Dept Elect Engn, Jaipur, Rajasthan, India
关键词
Biodiesel; optimization; multi-criteria decision-making (MCDM); GRA; flame test; CEIBA-PENTANDRA BIODIESEL; RESPONSE-SURFACE; EMISSION CHARACTERISTICS; HETEROGENEOUS CATALYST; SEED OIL; PERFORMANCE; CASTOR; COMBUSTION; PARAMETERS; VARIABLES;
D O I
10.1177/09544089221110954
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Population, industrialization, and urbanization made to exploit high volume of fossil fuels such as diesel to meet energy demands. Excess application of fossil fuels created environmental and health threats, hike in oil prices, and depletion of resources. Biodiesel was termed as a predominant alternative renewable fuel for diesel engines. In this research, a novel fuel is produced from the mixed feedstocks such as castor oil, mahua oil, and processed dairy waste by mixing in equal volumes (each 33.33% v/v). An esterification reaction was performed initially, since the acid value of raw oil is found to be 4.11 mg KOH/g oil. Three different acid catalyst concentrations (1, 2, and 3% v/v) were used to ascertain the effect of acid catalyst concentration on the acid value of oil. The acid value of esterified oil from the esterification reaction tends to decrease with an increase in acid concentration. Transesterification reaction parameters such as catalyst utilization (wt%), reaction temperature (degrees C), and oil to methanol ratio (molar) were varied in three levels (27 transesterification experiments) based on the Taguchi method to find the optimal reaction parameters for maximum biodiesel yield, high fuel flash point, and low fuel viscosity. At the end of each transesterification reaction, biodiesel yield percentage, and its properties such as fuel flash point and viscosity were measured as per the ASTM standard (D6751). Based on the multi-criteria decision-making-GRA method, the optimal value for maximum biodiesel yield and fuel properties such as flash point and viscosity was determined as catalyst utilization (3 wt%), reaction temperature (55 degrees C), and a molar oil to methanol ratio of 12. In addition, an earthen lamp test was conducted and measured properties of fuel were delineated to reveal that the produced biodiesel from the mixed non-edible oil is an effective feedstock for biodiesel production.
引用
收藏
页码:856 / 871
页数:16
相关论文
共 50 条
  • [41] Integration of grey-based Taguchi method and principal component analysis for multi-response decision-making in Kansei engineering
    Sutono, Sugoro Bhakti
    Abdul-Rashid, Salwa Hanim
    Taha, Zahari
    Subagyo
    Aoyama, Hideki
    EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING, 2017, 11 (02) : 205 - 227
  • [42] Assessment of urban surface performance of open spaces with multi-criteria decision-making method
    Serdar Yakut, Elif Safiye
    Cenani, Sehnaz
    Cagdas, Gulen
    MEGARON, 2022, 17 (04): : 658 - 672
  • [43] Review on multi-criteria decision analysis aid in sustainable energy decision-making
    Wang, Jiang-Jiang
    Jing, You-Yin
    Zhang, Chun-Fa
    Zhao, Jun-Hong
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2009, 13 (09) : 2263 - 2278
  • [44] ABAC: Alternative by alternative comparison based multi-criteria decision making method
    Biswas A.
    Baranwal G.
    Kumar Tripathi A.
    Expert Systems with Applications, 2022, 208
  • [45] Optimization of thermophysical properties of nanofluids using a hybrid procedure based on machine learning, multi-objective optimization, and multi-criteria decision-making
    Zhang, Tao
    Pasha, Anahita Manafi Khajeh
    Sajadi, S. Mohammad
    Jasim, Dheyaa J.
    Nasajpour-Esfahani, Navid
    Maleki, Hamid
    Salahshour, Soheil
    Baghaei, Sh.
    CHEMICAL ENGINEERING JOURNAL, 2024, 485
  • [46] Multi-Criteria Decision Making Method for Models with the Dominant Criterion
    Zizovic, Miodrag M.
    Damljanovic, Nada
    Zizovic, Malisa R.
    FILOMAT, 2017, 31 (10) : 2981 - 2989
  • [47] A Taguchi-based hybrid multi-criteria decision-making approach for optimization of performance characteristics of diesel engine fuelled with blends of biodiesel-diesel and cerium oxide nano-additive
    Khanam, Sazia
    Khan, Osama
    Ahmad, Shafi
    Sherwani, Ahmad F.
    Khan, Zahid A.
    Yadav, Ashok Kumar
    Agbulut, Uemit
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2024, 149 (08) : 3657 - 3676
  • [48] Multi-Criteria Decision-Making Techniques for Improvement Sustainability Engineering Processes
    Zavadskas, Edmundas Kazimieras
    Pamucar, Dragan
    Stevic, Zeljko
    Mardani, Abbas
    SYMMETRY-BASEL, 2020, 12 (06):
  • [49] Multi-criteria decision-making based on novel fuzzy generalized divergence and knowledge measures
    Djamal Chaabane
    Djedjiga Kheffache
    Granular Computing, 2023, 8 : 747 - 769
  • [50] Deadline based task scheduling using multi-criteria decision-making in cloud environment
    Nayak, Suvendu Chandan
    Tripathy, Chitaranjan
    AIN SHAMS ENGINEERING JOURNAL, 2018, 9 (04) : 3315 - 3324