Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

被引:5
|
作者
Balamurugan, S. [1 ]
Seenivasan, D. [2 ]
Kalos, Pritam S. [3 ]
Gupta, S. [4 ]
机构
[1] Sri Krishna Coll Engn & Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
[2] Coimbatore Inst Engn & Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India
[3] MIT Acad Engn, Sch Mech & Civil Engn, Pune, Maharashtra, India
[4] JECRC Univ, Dept Elect Engn, Jaipur, Rajasthan, India
关键词
Biodiesel; optimization; multi-criteria decision-making (MCDM); GRA; flame test; CEIBA-PENTANDRA BIODIESEL; RESPONSE-SURFACE; EMISSION CHARACTERISTICS; HETEROGENEOUS CATALYST; SEED OIL; PERFORMANCE; CASTOR; COMBUSTION; PARAMETERS; VARIABLES;
D O I
10.1177/09544089221110954
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Population, industrialization, and urbanization made to exploit high volume of fossil fuels such as diesel to meet energy demands. Excess application of fossil fuels created environmental and health threats, hike in oil prices, and depletion of resources. Biodiesel was termed as a predominant alternative renewable fuel for diesel engines. In this research, a novel fuel is produced from the mixed feedstocks such as castor oil, mahua oil, and processed dairy waste by mixing in equal volumes (each 33.33% v/v). An esterification reaction was performed initially, since the acid value of raw oil is found to be 4.11 mg KOH/g oil. Three different acid catalyst concentrations (1, 2, and 3% v/v) were used to ascertain the effect of acid catalyst concentration on the acid value of oil. The acid value of esterified oil from the esterification reaction tends to decrease with an increase in acid concentration. Transesterification reaction parameters such as catalyst utilization (wt%), reaction temperature (degrees C), and oil to methanol ratio (molar) were varied in three levels (27 transesterification experiments) based on the Taguchi method to find the optimal reaction parameters for maximum biodiesel yield, high fuel flash point, and low fuel viscosity. At the end of each transesterification reaction, biodiesel yield percentage, and its properties such as fuel flash point and viscosity were measured as per the ASTM standard (D6751). Based on the multi-criteria decision-making-GRA method, the optimal value for maximum biodiesel yield and fuel properties such as flash point and viscosity was determined as catalyst utilization (3 wt%), reaction temperature (55 degrees C), and a molar oil to methanol ratio of 12. In addition, an earthen lamp test was conducted and measured properties of fuel were delineated to reveal that the produced biodiesel from the mixed non-edible oil is an effective feedstock for biodiesel production.
引用
收藏
页码:856 / 871
页数:16
相关论文
共 50 条
  • [21] Multi-Criteria Decision-Making Method for Sustainable Energy-Saving Retrofit Facade Solutions
    Egiluz, Ziortza
    Cuadrado, Jesus
    Kortazar, Andoni
    Marcos, Ignacio
    SUSTAINABILITY, 2021, 13 (23)
  • [22] A Multi-Criteria Decision-Making Scheme for Multi-Aircraft Conflict Resolution
    Yang, Yang
    Prandini, Maria
    Cao, Xianbin
    Du, Wenbo
    IFAC PAPERSONLINE, 2017, 50 (01): : 14674 - 14679
  • [23] Determination of the Optimal Size of Photovoltaic Systems by Using Multi-Criteria Decision-Making Methods
    Guerrero-Liquet, Guido C.
    Oviedo-Casado, Santiago
    Sanchez-Lozano, J. M.
    Socorro Garcia-Cascales, M.
    Prior, Javier
    Urbina, Antonio
    SUSTAINABILITY, 2018, 10 (12)
  • [24] A MULTI-CRITERIA DECISION-MAKING APPROACH FOR GREENOVATIVE SUPPLIER SELECTION
    Buyukselcuk, Elif Caloglu
    Tozan, Hakan
    Vayvay, Ozalp
    INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE, 2022, 29 (02): : 283 - 301
  • [25] Optimization of multi-pathway production chains and multi-criteria decision-making through sustainability evaluation: a biojet fuel production case study
    Vyhmeister, Eduardo
    Ruiz-Mercado, Gerardo J.
    Torres, Ana I.
    Posada, John A.
    CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2018, 20 (07) : 1697 - 1719
  • [26] CONCRETop - A multi-criteria decision method for concrete optimization
    Kurda, Rawaz
    de Brito, Jorge
    Silvestre, Jose D.
    ENVIRONMENTAL IMPACT ASSESSMENT REVIEW, 2019, 74 : 73 - 85
  • [27] Multi-criteria decision making for collaborative design optimization of buildings
    Raphael, Benny
    BUILT ENVIRONMENT PROJECT AND ASSET MANAGEMENT, 2011, 1 (02) : 122 - 136
  • [28] FUZZY MULTI-CRITERIA DECISION MAKING METHOD BASED ON FUZZY STRUCTURED ELEMENT WITH INCOMPLETE WEIGHT INFORMATION
    Wang, Xinfan
    Wang, Jianqiang
    Chen, Xiaohong
    IRANIAN JOURNAL OF FUZZY SYSTEMS, 2016, 13 (02): : 1 - 17
  • [29] A multi-criteria decision making method for vapor smoothening fused deposition modelling part
    Sugavaneswarn, M.
    Prashanthi, B.
    Rajan, John A.
    RAPID PROTOTYPING JOURNAL, 2022, 28 (02) : 236 - 252
  • [30] Application of optimized multi-criteria decision-making in an environmental impact assessment study
    Bose, P
    Chakrabarti, R
    CIVIL ENGINEERING AND ENVIRONMENTAL SYSTEMS, 2003, 20 (01) : 31 - 48