Constitutive model for plain and fiber-reinforced lightweight concrete under compression

被引:5
作者
Al-Naimi, Hasanain K. K. [1 ]
Abbas, Ali A. A. [1 ,2 ]
机构
[1] Univ East London, London, England
[2] Univ East London, Struct Engn, London, England
关键词
compressive strength; compressive toughness; constitutive compressive & sigma; -& epsilon; model; ductility; hooked-end steel fibers; lightweight concrete; STRESS-STRAIN RELATIONSHIP; HIGH-STRENGTH; MECHANICAL-PROPERTIES; STEEL FIBERS; AGGREGATE CONCRETE; BEHAVIOR; PERFORMANCE; TOUGHNESS;
D O I
10.1002/suco.202200646
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this research work, experimental investigations of the compressive behavior of plain and fiber-reinforced lightweight-aggregate concrete have been carried out (this formed part of a wider study, which also examined tensile and flexural behaviors). Compression mechanical properties were established in the studies and a generic constitutive compressive s-e model for both plain and fibrous lightweight concrete was derived and validated against experimental results from the present studies and previous research in the literature involving different types of lightweight aggregates, concrete strengths, and steel fibers. The reliability of predictions of the constitutive model was also checked against existing fibrous concrete models. A fiber-reinforcing factor was also introduced taking into account the fiber volume fraction, fiber length and diameter, the number of fiber bends, and concrete compressive strength. As such, this was considered a better descriptor of the material than simply using the fiber volume fraction. The lightweight aggregates examined in the experimental study were recycled from fly ash waste and the fibers were hooked-ended with single, double, and triple bends (corresponding to DRAMIX steel fibers 3D, 4D, and 5D types, respectively). The fibers were added at volume fractions V-f of 1% and 2% and the experimental studies were carried out using standard cube and cylinder uniaxial compression test specimens. It was concluded that the higher the number of bends and fiber content, the more pronounced the enhancement provided by the fibers to the compressive strength and ductility responses. All steel fibers used in the present studies were found to significantly improve the compressive toughness, while only 4D and 5D fibers (i.e., those with double and triple end bends) enhanced the compressive strength by up to 12% and 15%, respectively. It was also found that the elastic properties of plain lightweight concrete remained unaffected by the addition of fibers.
引用
收藏
页码:7625 / 7647
页数:23
相关论文
共 89 条
[41]   Behaviour of hybrid fibre reinforced high-strength lightweight aggregate concrete [J].
Daneti, Saradhi Babu ;
Wee, Tiong-Huan .
MAGAZINE OF CONCRETE RESEARCH, 2011, 63 (11) :785-796
[42]   Effect of 3D, 4D, and 5D hooked-end type and loading rate on the pull-out performance of shape memory alloy fibres embedded in cementitious composites [J].
Dehghani, Ayoub ;
Aslani, Farhad .
CONSTRUCTION AND BUILDING MATERIALS, 2021, 273
[43]   Fibre-reinforced concrete in fib Model Code 2010: principles, models and test validation [J].
di Prisco, Marco ;
Colombo, Matteo ;
Dozio, Daniele .
STRUCTURAL CONCRETE, 2013, 14 (04) :342-361
[44]   Longitudinal reinforcement ratio in lightweight aggregate concrete beams [J].
Dias-da-Costa, D. ;
Carmo, R. N. F. ;
Graca-e-Costa, R. ;
Valenca, J. ;
Alfaiate, J. .
ENGINEERING STRUCTURES, 2014, 81 :219-229
[45]   MODIFICATION OF PROPERTIES OF STRUCTURAL LIGHTWEIGHT CONCRETE WITH STEEL FIBRES [J].
Domagala, Lucyna .
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2011, 17 (01) :36-44
[46]   Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete [J].
Düzgün, OA ;
Gül, R ;
Aydin, AC .
MATERIALS LETTERS, 2005, 59 (27) :3357-3363
[47]   Properties of high-strength lightweight concrete using manufactured aggregate [J].
Evangelista, Ana Catarina Jorge ;
Tam, Vivian W. Y. .
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS, 2020, 173 (04) :157-169
[48]  
Ezeldin A.S., 1992, J MAT CIVIL ENG, V4, P415, DOI DOI 10.1061/(ASCE)0899-1561(1992)4:4(415)
[49]  
Federation Internationale du beton, 2013, FIB MOD COD CONCR ST, P147
[50]   Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete [J].
Gao, JM ;
Sun, W ;
Morino, K .
CEMENT & CONCRETE COMPOSITES, 1997, 19 (04) :307-313