Constitutive model for plain and fiber-reinforced lightweight concrete under compression

被引:4
作者
Al-Naimi, Hasanain K. K. [1 ]
Abbas, Ali A. A. [1 ,2 ]
机构
[1] Univ East London, London, England
[2] Univ East London, Struct Engn, London, England
关键词
compressive strength; compressive toughness; constitutive compressive & sigma; -& epsilon; model; ductility; hooked-end steel fibers; lightweight concrete; STRESS-STRAIN RELATIONSHIP; HIGH-STRENGTH; MECHANICAL-PROPERTIES; STEEL FIBERS; AGGREGATE CONCRETE; BEHAVIOR; PERFORMANCE; TOUGHNESS;
D O I
10.1002/suco.202200646
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this research work, experimental investigations of the compressive behavior of plain and fiber-reinforced lightweight-aggregate concrete have been carried out (this formed part of a wider study, which also examined tensile and flexural behaviors). Compression mechanical properties were established in the studies and a generic constitutive compressive s-e model for both plain and fibrous lightweight concrete was derived and validated against experimental results from the present studies and previous research in the literature involving different types of lightweight aggregates, concrete strengths, and steel fibers. The reliability of predictions of the constitutive model was also checked against existing fibrous concrete models. A fiber-reinforcing factor was also introduced taking into account the fiber volume fraction, fiber length and diameter, the number of fiber bends, and concrete compressive strength. As such, this was considered a better descriptor of the material than simply using the fiber volume fraction. The lightweight aggregates examined in the experimental study were recycled from fly ash waste and the fibers were hooked-ended with single, double, and triple bends (corresponding to DRAMIX steel fibers 3D, 4D, and 5D types, respectively). The fibers were added at volume fractions V-f of 1% and 2% and the experimental studies were carried out using standard cube and cylinder uniaxial compression test specimens. It was concluded that the higher the number of bends and fiber content, the more pronounced the enhancement provided by the fibers to the compressive strength and ductility responses. All steel fibers used in the present studies were found to significantly improve the compressive toughness, while only 4D and 5D fibers (i.e., those with double and triple end bends) enhanced the compressive strength by up to 12% and 15%, respectively. It was also found that the elastic properties of plain lightweight concrete remained unaffected by the addition of fibers.
引用
收藏
页码:7625 / 7647
页数:23
相关论文
共 89 条
[1]   Seismic response of steel fibre reinforced concrete beam-column joints [J].
Abbas, Ali A. ;
Mohsin, Sharifah M. Syed ;
Cotsovos, Demetrios M. .
ENGINEERING STRUCTURES, 2014, 59 :261-283
[2]  
Abdallah S., 2016, CONSTRUCTION ARCHITE, V10, P1594
[3]   Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete [J].
Abdallah, Sadoon ;
Rees, David W. A. ;
Ghaffar, Seyed Hamidreza ;
Fan, Mizi .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 178 :484-494
[4]   Pull-Out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios [J].
Abdallah, Sadoon ;
Fan, Mizi ;
Zhou, Xiangming .
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS, 2017, 11 (02) :301-313
[5]   Analysis and modelling of mechanical anchorage of 4D/5D hooked end steel fibres [J].
Abdallah, Sadoon ;
Fan, Mizi ;
Rees, David W. A. .
MATERIALS & DESIGN, 2016, 112 :539-552
[6]  
ACI, 1989, BUILD COD REQ STRUCT
[7]   Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures [J].
Ahn, Y. B. ;
Jang, J. G. ;
Lee, H. K. .
CEMENT & CONCRETE COMPOSITES, 2016, 72 :27-38
[8]   Effect of initial curing on early strength and physical properties of a lightweight concrete [J].
Al-Khaiat, H ;
Haque, MN .
CEMENT AND CONCRETE RESEARCH, 1998, 28 (06) :859-866
[9]  
Al-Naimi H., 2019, ECCOMAS PROCEEDIA CO, P4009
[10]   Comparison of Flexural Performance of Lightweight Fibre-reinforced Concrete and Normalweight Fibrere-inforced Concrete [J].
Ali, Ahsan ;
Iqbal, Shahid ;
Holschemacher, Klaus ;
Bier, Thomas A. .
PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2017, 61 (03) :498-504