Effects of various double-quenching treatments on the microstructure and corrosion properties of D2 tool steel

被引：4

作者：

Ahmadi, Monireh ^{[1
]}

Mirzaee, Omid ^{[1
]}

Azadi, Maboobeh ^{[1
]}

Biukani, Hootan ^{[2
]}

机构：

[1] Semnan Univ, Fac Mat & Met Engn, POB 35131-19111, Semnan, Iran

[2] Mat & Energy Res Ctr, Dept Ceram, POB 35131-19111, Karaj, Iran

来源：

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | 2023年 / 202卷

关键词：

D2 tool steel; Double; -quenching; Corrosion behavior; 0; 6 M NaCl Solution; Microstructure; DEEP CRYOGENIC TREATMENT; WEAR BEHAVIOR; CARBIDE COATINGS; HEAT-TREATMENT; CRYOTREATMENT; FRICTION;

D O I：

10.1016/j.ijpvp.2023.104915

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The purpose of this paper is to study the effects of the various double-quenching treatments on the microstructure and corrosion properties of D2 tool steel. The percentage and the size of carbides and the phase types were parameters that affected the properties of various specimens. Both optical and field emission scanning electron microscopy were used to study the specimen microstructure. Moreover, the Tafel polarization, electrochemical impedance spectroscopy, and weight loss tests were evaluated to investigate the corrosion behavior. The obtained results showed that the martensite and tempered martensite phases exhibited the highest and lowest corrosion rates in 0.6 M NaCl solution, respectively. A Higher percentage of (Cr, Fe)7C3 carbides with a higher size also caused an increase in the corrosion resistance up to 91.2%. The lowest corrosion rate after 96 h was also related to tempered specimens.

引用

页数：12

共 37 条

[1] Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel [J].

Amini, Kamran ;

Akhbarizadeh, Amin ;

Javadpour, Sirus .

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2012, 19 (09) :795-799

[2] Effects of manufacturing parameters on the corrosion behavior of Al-B4C nanocomposites [J].

Arab, Mohammad ;

Azadi, Maboobeh ;

Mirzaee, Omid .

MATERIALS CHEMISTRY AND PHYSICS, 2020, 253

[3] The Effect of Different Heat Treatment Procedures on Duplex Stainless Steel Microstructures and Electrochemical Properties [J].

Azadi, M. ;

Ferdosi, M. ;

Shahin, H. .

IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2020, 17 (01) :91-101

[4]

Azadi M, 2020, Prog. Color Colorants Coat., V13, P213

[5] The Effect of New Double Solution Heat Treatment on the High Manganese Hadfield Steel Properties [J].

Azadi M. ;

Pazuki A.M. ;

Olya M.J. .

Metallography, Microstructure, and Analysis, 2018, 7 (05) :618-626

[6] An enhancement on corrosion resistance of low carbon steel by a novel bio-inhibitor (leech extract) in the H2SO4 solution [J].

Bidi, Mohammad Amin ;

Azadi, Mahboobeh ;

Rassouli, Maryam .

SURFACES AND INTERFACES, 2021, 24

[7] Wear and corrosion resistance of niobium-chromium carbide coatings on AISI D2 produced through TRD [J].

Castillejo, F. E. ;

Marulanda, D. M. ;

Olaya, J. J. ;

Alfonso, J. E. .

SURFACE & COATINGS TECHNOLOGY, 2014, 254 :104-111

[8] Wear and Corrosion Resistance of Chromium-Vanadium Carbide Coatings Produced via Thermo-Reactive Deposition [J].

Castillejo, Fabio ;

Jairo Olaya, Jhon ;

Edgar Alfonso, Jose .

COATINGS, 2019, 9 (04)

[9] On the corrosion behavior of TiN-coated AISI D2 steel [J].

Chen, BF ;

Pan, WL ;

Yu, GP ;

Hwang, J ;

Huang, JH .

SURFACE & COATINGS TECHNOLOGY, 1999, 111 (01) :16-21

[10] Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel [J].

Das, D. ;

Dutta, A. K. ;

Toppo, V. ;

Ray, K. K. .

MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (04) :474-480

← 1 2 3 4 →